Dental SG Resin

Class 1 biocompatible resin for surgical guides.

Dental SG is a Class 1 biocompatible resin (EN-ISO 10993-1:2009/AC:2010, USP Class VI) for creating precise surgical guides and similar applications. Tuned for accuracy and precision, the resin is designed to directly print surgical and pilot drill guides.

Digital Dentistry with Formlabs

Print accurate surgical guides for implant dentistry.

1. Digital Design

Design surgical guides by using implant treatment planning software to integrate CBCT and intraoral scan data.

2. Print and Prepare

Print on the Form 2 with Formlabs Dental SG Resin. Post-cure with a cure chamber, remove supports, and add drill sleeves.

3. Procedure

Simply sterilize prints in an autoclave to use surgical guides directly in the mouth during implant surgery.

Note

To achieve desired properties, the Instructions for Use must be followed. Prints made with Dental SG Resin should be fully post-cured for 10 minutes at a 60°C temperature under 108W of both UV-A and UV-Blue light. Contact Customer Support for post-curing recommendations.

Bring the Advantages of Digital Implantology to Your Practice.

Effective presurgical planning

Examine vital structures and osseous topography in implant planning software to perform less invasive procedures and conserve anatomic structures.

Improved patient experience

Avoid messy manual impressions and tedious stone model pour-ups by taking digital impressions. Reduce surgical time compared to freehand techniques.

Precise implant placement

Carry out precise implant procedures with confidence. Superimpose preoperative and postoperative CBCT scans to easily verify final implant placement accuracy.

Clinical Case Study

Accurate implant placement and clinical outcomes are crucial in digital implantology. Learn how Daniel Whitley DDS and Sompop Bencharit DDS, MS, FACP tested and verified the performance and precision of Dental SG in this white paper. Read about print accuracy, incorporating 3D printing into a clinical workflow, and actual clinical outcomes from the first implant surgery with a Dental SG printed surgical guide.

Access the White Paper

Precise, Strong, Certified.

Accuracy Study

This difference map shows a 3D scan of the printed surgical guide overlaid with the original 3D model. The color mapping indicates differences with the green areas revealing dimensional accuracy within ± 50 microns. A study of 84 surgical guides printed with Dental SG resin were scanned with an orthodontic scanner and compared with the .STLs of the intended models. Results showed that printed models were dimensionally accurate within ± 100 microns over 93% of the surface area, providing a precise fit for dental surgical applications.

ISO Standards

EN-ISO 10993-1:2009/AC:2010
Biological evaluation of medical devices - Part 1 - Evaluation and testing

EN-ISO 20795-1:2013
Dentistry - Base Polymers - Part 1: Denture Base Polymers

EN-ISO 7405:2009/A1:2013
Dentistry - Evaluation of biocompatibility of medical devices used in dentistry

Property Value Method
Shore Hardness ≥ 80D ISO 868:2003
Flexural Strength ≥ 50MPa ISO 20795-1:2013
Flexural Modulus ≥ 1500MPa ISO 20795-1:2013

Accuracy Study

This difference map shows a 3D scan of the printed surgical guide overlaid with the original 3D model. The color mapping indicates differences with the green areas revealing dimensional accuracy within ± 50 microns. A study of 84 surgical guides printed with Dental SG resin were scanned with an orthodontic scanner and compared with the .STLs of the intended models. Results showed that printed models were dimensionally accurate within ± 100 microns over 93% of the surface area, providing a precise fit for dental surgical applications.

ISO Standards

EN-ISO 10993-1:2009/AC:2010
Biological evaluation of medical devices - Part 1 - Evaluation and testing

EN-ISO 20795-1:2013
Dentistry - Base Polymers - Part 1: Denture Base Polymers

EN-ISO 7405:2009/A1:2013
Dentistry - Evaluation of biocompatibility of medical devices used in dentistry

Surgical Guide White Paper

Learn how Daniel Whitley DDS and Sompop Bencharit DDS, MS, FACP perform dental implant surgery with Dental SG in this white paper, including in-depth information on impact placement accuracy with the Form 2.

Digital Dentistry

See more examples of how dentists use their Form 2 to create surgical guides, surgical practice models, retainers, aligners, educational models, and more.

DENTAL RESOURCES

Reference these documents for specifics on working with Dental SG Resin.

Dental SG EC Declaration of Conformity
Dental SG Declaration of Biocompatability
Dental SG Instructions for Use

Handhabung und Sicherheit

Bei der Herstellung unserer Kunstharze wurde auf größtmögliche Sicherheit geachtet. Dennoch erfordert die Arbeit mit diesen Produkten die gleiche Sorgfalt wie die Arbeit mit herkömmlichen Klebern oder Haushaltsreinigern. Sie entwickeln keinen starken Geruch und enthalten keine flüchtigen Lösungsmittel, daher ist keine besondere Belüftung erforderlich. Der Kontakt mit der Haut ist zu vermeiden.

Sollten Sie Fragen haben, nehmen Sie mit uns Kontakt auf.

Angebot anfordern

Formlabs currently serves customers with shipping addresses in the USA, Canada, and Europe. For more information check out our Shipping information page. {.sample-disclaimer}

Formlabs currently serves customers with shipping addresses in the USA, Canada, and Europe. For more information check out our Shipping information page. {.sample-disclaimer}

×

Fragen? Nehmen Sie Kontakt mit uns auf.

Korrespondenz leider nur in Englisch möglich

Bitte beachten Sie, dass wir zum gegenwärtigen Zeitpunkt Hilfe und Support nur in englischer Sprache anbieten können.

Questions? Get in touch.

×