Contents
Introduction
Method
Process Workflow
Design Guidelines
Other Best Practices
Case Studies
Braskem Fabricated 3000 Mask Straps in a Week With a High Temp Resin Mold Insert
Holimaker Produces 100s of Technical Parts With Grey Pro Molds
Novus Applications Inject Molded Hundreds of Threaded Caps With a Rigid 10K Three-Parts Mold
Conclusion
Introduction
Injection molding is one of the leading processes for manufacturing plastics. It is widely used for mass-producing identical parts with tight tolerances. It is a cost-effective and extremely repeatable technology that yields high-quality parts for large series. It can produce volumes from 1,000 to 100,000+ of parts at very low unit costs. Injection molding has a short cycle time, with each machine capable of building new parts every 15 to 60 seconds. It is a fast, intensive process where high heat and pressure are involved to melt thermoplastic and force it inside a mold.
Method
PROCESS WORKFLOW
INJECTION MOLDING PROCESS WITH 3D PRINTED MOLDS
INJECTION MOLDING PROCESS WITH 3D PRINTED MOLDS
Fill out the form to read the white paper.
Fill out this short form to get the full white paper by email.
