×

Resin Tank Care

Optically clear resin tanks are a crucial component for successful prints. When using and storing your resin tanks, it is important to keep your resin tank clean to achieve high quality prints and prolong the life of your resin tanks.

To clean the tank’s bottom window from dust, debris, or fingerprints, use a specialized acrylic cleaner such as Novus 1 and a clean microfiber cloth.

1. Remove the build platform and tank

Tip

Always remove the build platform before removing the resin tank to avoid dripping leftover material into the printer body. Hold the tank by the front tabs, sides or rim, to avoid getting fingerprints on the internal and external surfaces of the window. Do not rub or scratch and do not allow resin on the underside of the tank.


2. Spray Novus 1


3. Wipe surface clean with microfiber cloth


4. Reinspect the tank

Warning

Do not use IPA or any paper or cloth towel to clean inside the tank.

Storing Resin Tanks

Unopened resin tanks can be kept in the box. Once a tank has been used to hold resin, it must be protected from ambient light. Keep the black tank cover to protect resin and stack multiple tanks. The orange acrylic will also block light for tanks stored outside of the Form 1+. It is best practice to keep all resin tanks out of direct sunlight.

Stacking Resin Tanks

Contact Support

Questions? Get in touch.

×