×

Receiving Your Form 2

Start printing sooner by knowing what to expect with the printer’s delivery. Each shipment includes 3 or more boxes, depending on the additional items ordered. Here’s what to expect:


Form 2 Packages

The standard Form 2 bundle ships with 3 boxes: Resin Cartridge, Printer, and Finish Kit. The resin tank and build platform boxes ship inside the Form 2 packaging. Additional accessory purchases ship separately.

The 3 boxes that come with your Form 2 3D printer
From left, the 3 standard shipment boxes: Resin Cartridge, Printer, and Finish Kit

Packaged shipments have the following dimensions and weights:

Form 2 Printer Form 2 Finish Kit Resin Cartridge Form 2 Resin Tank Form 2 Build Platform
Dimensions 18x18x27 in
(46x46x68 cm)
8x9x9 in
(46x23x23 cm)
9.5x8x3 in
(24x20x8 cm)
11.25x11x3 in
(29x28x8 cm)
7x6.75x3 in
(18x17x8 cm)
Weight 44 lbs (20 kg) 6.6 lbs (3 kg) 3.3 lbs (1.5 kg) 1.8 lbs (0.85 kg) 1.5 lbs (0.67 kg)
Contents printer, build platform, resin tank, power and USB cables see Finish Kit Set-Up single cartridge single resin tank single build platform

Before Receiving Your Form 2

  1. Choose a stable, level workspace for your Form 2. Reserve the following minimum dimensions for the most convenient access: 14 in (36 cm) width, 17 in (43 cm) depth, 30 in (76 cm) height.
  2. Download and install PreForm Software.
  3. Purchase additional supplies:
    • Paper Towels
    • Isopropyl Alcohol (90% or higher)

Unboxing Your Form 2

TIP:

Save the Form 2's printer packaging for transporting your printer. Original packaging is required for warranty service.

  1. Remove the top foam packaging insert. Remove the foam packaging from your Form 2 box
  2. Use the provided handles to lift your printer from the box. Lift the Form 2 out of the box
  3. Remove the printer from the carrier tray and set in workspace.
  4. Plug the included power cable into your printer and connect to a power outlet. Plug in your Form 2 3D printer

Proceed to set up the Finish Kit and connect to your Form 2.

Contact Support

Questions? Get in touch.

×