Fuse Sift and Fuse Blast Technical Specifications

Parameters

Fuse Sift
Fuse Sift
Fuse Blast
Fuse Blast
Printer compatibility

Fuse Series SLS 3D Printers

Fuse Series SLS 3D Printers

Third-party powder bed fusion 3D printers

Minimum dimensions for convenient access (W × D × H)
221.1 × 122.0 × 218.0 cm
87.1 × 48.0 × 85.8 in
145 × 150 × 210 cm
57.4 × 59.6 × 82.6 in
Product dimensions (W × D × H)
101.5 × 61.0 × 154.5 cm
39.9 × 24.0 × 60.8 in
Height when open: 190 cm (75 in)
100 × 75 × 175 cm
39 × 29.6 × 68.7 in
Height when open: 195 cm (76.8 in)
Product weight
93 kg (without build chamber or powder)
205 lb (without build chamber or powder)
164 kg (without blasting media)
360 lb (without blasting media)
Hopper capacity
Fresh Powder Hopper Capacity: 17 liters
Used Powder Hopper Capacity: 18 liters
Media hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media
Waste hopper capacity 10.6 L
Operating environment
18 – 26 ºC
68 – 80 ºF
≤ 30% ambient humidity
10–36 ºC
50–96.8 ºF
Elevation up to 7500 ft / 2286 meters
Air handling
Negatively pressurized hood with replaceable HEPA filter
Independent venting system
Negatively pressurized hood with replaceable HEPA filter
Independent venting system
Power requirements ¹
EU: 230 VAC, 7.5 A (dedicated circuit)
US: 120 VAC, 15 A (dedicated circuit)
EU: 230 VAC, 3 A (no dedicated circuit or vacuum required)
US: 120 VAC, 6 A (no dedicated circuit or vacuum required)
Power requirements ²
EU: 230 VAC, 10 A (dedicated circuit)
US: 120 VAC, 20 A (dedicated circuit)
N/A
Vacuum requirement
Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)
No vacuum required
Compressed air requirements
N/A
Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar.
Regulate pressure input between 90-120 PSI / 6-8 bar.
Typically achieved by a single 4 HP compressor.
Connectivity
Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0
Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0
Wi-Fi connectivity
Protocol: IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security: WPA/WPA2
Protocol: IEEE 802.11 b/g/n/ac
Frequency: 2.4 / 5.0 GHz
Supported security: WPA/WPA2
Ethernet connectivity
RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port. Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port. Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
USB connectivity
USB (rev 2.0) B port with a USB A-B cable
USB (rev 2.0) C port with a USB A-C or C-C cable
Sound emission
Does not exceed 76.5 dB(A)
Does not exceed 75 dB(A)
Product control
Interactive touchscreen, physical buttons
Interactive touchscreen, foot pedals for manual control
Build chamber dimension
27.9 × 34.2 × 48.9 cm
11.0 × 13.5 × 19.3 in
N/A
Build chamber weight
11 kg (17.6 kg, full with 20% packed powder)
24.3 lb (38.8 lb, full with 20% packed powder)
N/A
Included accessories
Large Brush
Small Brush x 2
Pipe Cleaners
Dental Picks
Gloves
Dust Mask
Safety Glasses
Vacuum Brush Tool
Vacuum Crevice Tool
Lifting Straps
Transfer container
Control pedals
ESD wrist strap
7mm socket wrench
Blast orifice (3mm)
Blast orifice (4mm - installed)
T-20 driver
Floor mat
Tumbling basket dimensions
N/A
Internal diameter: 450 mm / 17.7”
Opening diameter: 345 mm / 13.6”
Basket depth: 250 mm / 9.8”
Basket is removable without tools.
Fits a full Fuse build volume.
Internal work area (W x D x H)
N/A
71 x 55 x 67 cm
27.9 x 21.6 x 26.3 in
Accessible work area (W x D x H)
N/A
57 x 50 x 67 cm
22.4 x 19.6 x 26.4 in
(basket removed)

With a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC).

With a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC)

Request a Free Sample 3D Print

See and feel Formlabs quality firsthand. We’ll ship a free sample part to your office.

Nylon 11 Sample Part

Explore Fuse Sift

Interactive Tour

Explore Fuse Blast