Fuse Sift Technical Specifications
Selective Laser Sintering Powder Recovery Station
Printer Compatibility
Fuse 1
Fuse Sift Dimensions (W × D × H)
99.1 × 61.0 × 188.8 cm
39.0 × 24.0 × 61.8 in
Height when open: 190 cm (75 in)
39.0 × 24.0 × 61.8 in
Height when open: 190 cm (75 in)
Build Chamber Dimensions (W × D × H)
27.9 × 34.2 × 48.9 cm
11.0 × 13.5 × 19.3 in
11.0 × 13.5 × 19.3 in
Minimum Access Dimensions (W × D × H)
221.1 × 122.0 × 218.0 cm
87.1 × 48.0 × 85.8 in
87.1 × 48.0 × 85.8 in
Fuse Sift Weight
93 kg (without build chamber or powder)
205 lb (without build chamber or powder)
205 lb (without build chamber or powder)
Build Chamber Weight
11 kg (17.6 kg, full with 20% packed powder)
24.3 lb (38.8 lb, full with 20% packed powder)
24.3 lb (38.8 lb, full with 20% packed powder)
Build Volume (W × D × H)
16.5 x 16.5 x 30.0 cm (with radiused corners)
6.5 × 6.5 × 11.8 in (with radiused corners)
6.5 × 6.5 × 11.8 in (with radiused corners)
Fresh Powder Hopper Capacity
10.7 kg Nylon 12
23.6 lb Nylon 12
23.6 lb Nylon 12
Used Powder Hopper Capacity
9.8 kg Nylon 12
21.6 lb Nylon 12
21.6 lb Nylon 12
Operating Environment
18 – 26 ºC
68 – 80 ºF
≤ 30% ambient humidity
68 – 80 ºF
≤ 30% ambient humidity
Air Handling
Negatively pressurized hood with replaceable HEPA filter
Independent venting system
Independent venting system
Air Filtration
Replaceable HEPA medium
Power Requirements (with a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC))
EU: 230 VAC, 7.5 A (dedicated circuit)
US: 120 VAC, 15 A (dedicated circuit)
US: 120 VAC, 15 A (dedicated circuit)
Power Requirements (with a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC))
EU: 230 VAC, 10 A (dedicated circuit)
US: 120 VAC, 20 A (dedicated circuit)
US: 120 VAC, 20 A (dedicated circuit)
Vacuum Requirements
Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)
Connectivity
Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0
Ethernet (1000 Mbit)
USB 2.0
Ethernet Connectivity
RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port
Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
Wi-Fi Connectivity
Protocol: IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security: WPA/WPA2
Frequency: 2.4 GHz
Supported security: WPA/WPA2
USB Connectivity
USB (rev 2.0) B port with a USB A-B cable
Sound Emission
Does not exceed 76.5 dB(A)
Fuse Sift Control
Interactive touchscreen, physical buttons
Included Accessories
Large Brush
Small Brush x 2
Pipe Cleaners
Dental Picks
Gloves
Dust Mask
Safety Glasses
Vacuum Brush Tool
Vacuum Crevice Tool
Lifting Straps
Small Brush x 2
Pipe Cleaners
Dental Picks
Gloves
Dust Mask
Safety Glasses
Vacuum Brush Tool
Vacuum Crevice Tool
Lifting Straps