Why Choose BioMed White Resin?
Fuel medical innovation using 3D printing and BioMed White Resin for producing end-use devices where performance and biocompatibility are critical.
Medical-Grade Material
Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.
Good Definition
Produce parts and assemblies with complex designs and geometries.
High Contrast
Create contrast between substances or surfaces to aid in visualization with a white, opaque material.
Biocompatible and Sterilizable Parts
Testing conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.
Applications
Material Properties
Post-cured at 60ºC for 60 min
BioMed White Resin
Ultimate Tensile Strength
Tensile Modulus
Elongation
Flexural Strength
Flexural Modulus
Hardness Shore D
Notched Izod
Heat Deflection Temp @ 0.45 MPa
1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used.
2 Data were measured on post-cured samples printed on a Form3B with 100um BioMed White Resin settings, washed in a Form Wash for 5 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C, 60 minutes in a Form Cure.
3 BioMed White Resin was tested at NAMSA World Headquarters, OH, USA.
Post-Processing
Form Wash Settings
5 min in IPA or until clean
Wash until clean. Biocompatible resins must be washed in a dedicated biocompatible IPA bath. They cannot be washed in IPA that is cross-contaminated with other resins.
Form Cure Settings
60 min
60 °C
Follow the post-curing indications to achieve maximum material properties.
