Soft Tissue Starter Pack (Form 3)
From€344.85incl. 21% BTW
Soft Tissue Starter Pack enables you to create your own Soft Tissue Resin in customizable dark, medium, and light pink shades to 3D print flexible gingiva masks for use in combination with rigid dental models to confidently check implant prosthetics by adding removable soft tissue components to your model production.
Magenta Color Pigment, Yellow Color Pigment, and White Color Pigment can also be purchased separately.
Read our application guide to learn the complete digital workflow and best practices for making 3D printed gingiva masks on your Formlabs 3D printer.
Tech specs
- Compatible Build Platform
- Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 3L Build Platform 2L
- Compatible Tank
- Form 2 LT Tank, Form 3 Resin Tank V2.1
- Compatible Printer
- Form 3B, Form 3BL, Form 2
- Print Technology
- SLA
- Categories
- Dental
Soft Tissue Starter Pack enables you to create your own Soft Tissue Resin in customizable dark, medium, and light pink shades to 3D print flexible gingiva masks for use in combination with rigid dental models to confidently check implant prosthetics by adding removable soft tissue components to your model production.
Magenta Color Pigment, Yellow Color Pigment, and White Color Pigment can also be purchased separately.
Read our application guide to learn the complete digital workflow and best practices for making 3D printed gingiva masks on your Formlabs 3D printer.
Tech specs
- Compatible Build Platform
- Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 3L Build Platform 2L
- Compatible Tank
- Form 2 LT Tank, Form 3 Resin Tank V2.1
- Compatible Printer
- Form 3B, Form 3BL, Form 2
- Print Technology
- SLA
- Categories
- Dental
Accessories
- €163.35 incl. 21% BTW€163.35 incl. 21% BTW
- €332.75 incl. 21% BTW€332.75 incl. 21% BTW
Ready to orderSoft Tissue Starter Pack (Form 3)
€344.85incl. 21% BTW
Applications
Soft Tissue Starter Pack empowers dental laboratories to print gingiva masks for implant models and other soft tissue models on a Formlabs printer.
Minimize chairside adjustment time
Consistently check implant prosthetics
Material Properties*
| Parameter |
Value |
|---|---|
|
Ultimate Tensile Strength |
8.9 MPa |
|
Elongation |
120% |
|
Compression Set (23 °C for 22 hours) |
3% |
|
Shore Hardness |
80A |
|
Bayshore Resilience |
28% |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 3, 100 μm, Flexible 80A settings, washed in Form Wash for 10 minutes and post-cured with Form Cure at 60 °C for 10 minutes.