Formlabs Resin Washing Solution (5 L)

SLN-RW-01

Shipping time: Est. Nov 22 - 25

Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.

Formlabs Resin Washing Solution is recommended with the Form Wash (2nd Generation) and Form Wash L.

*Based on GHS Classification

  • Formlabs Resin Washing Solution (5 L)
Formlabs Resin Washing Solution

Why Choose Formlabs Resin Washing Solution


Stable and Cost-Effective

Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash.


Validated Non-Flammable

Non-flammable per GHS classification, mitigating storage and EH&S concerns.


Longer Solution Lifetime

Twice the longevity of IPA and minimal evaporation, leading to less frequent top-offs and full changeouts of washing solution.


Simplified Sourcing

Whether you buy Formlabs or our partners, you can now get your resins and washing solution all in one place.

Using Formlabs Resin Washing Solution

Utilize the following workflow for best success with Formlabs Resin Washing Solution

Formlabs Resin Washing Solution Workflow graphic

*Volume Requirements:
Form Wash (2nd Generation): 3 units (15 liters)
Form Wash L: 8 units (40 liters)

Resin Washing Solutions Comparison

SolutionFully non - flammable workflowCost $ / LSaturation LimitSolution amount lost to evaporation*Solution Lifetime* (days)Cost per wash ($USD)
IPANo$7.6710%1.18 L97$1.08
Formlabs Resin Washing SolutionYes$15.0020%~ 0 L240$0.91
Non-Flammable CompetitorYes$28.0020%~ 0 L240$1.69
Competitor High-Saturation Limit SolutionNo - requires secondary flammable solvent$52.50**35%~ 0 L420$1.81

*Assuming 1 print per day.
**Secondary flammable solvent is factored into cost.

Compatibility

Formlabs Resin Washing solution is compatible with most non-biocompatible Formlabs Resins

General PurposeEngineeringCastingDental
Clear ResinTough 2000 ResinCastable Wax 40 ResinPrecision Model Resin
Grey ResinTough 1500 ResinClear Cast ResinModel Resin
White ResinRigid 10K Resin
Black ResinRigid 4000 Resin
Fast Model ResinDurable Resin
Draft ResinHigh Temp Resin
Grey Pro ResinESD Resin

Formlabs Resin Washing solution is not compatible with the Flexible and Elastic Resin family, or resins that require a validated workflow (Biocompatible, Flame Retardant Resin, etc.)