BioMed Amber Resin

Why Choose BioMed Amber Resin?

Fuel medical innovation using 3D printing and BioMed Amber Resin for producing end-use devices where performance and biocompatibility are critical.

Medical-Grade Material

Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.

Biocompatible and Sterilizable Parts

Testing conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.


Visibility through parts allows light to pass through.

Excellent Definition

Produce parts and assemblies with complex designs and geometries.


Use BioMed Amber Resin for producing rigid, transparent parts for point-of-care and medical manufacturing applications requiring biocompatibility.

Consider BioMed Amber Resin for:

End-use medical devices
Implant sizing models
Cut + drill guides
Specimen collection kits

*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available. 

Material Properties

BioMed Amber Resin

Ultimate Tensile Strength

73 MPa

Young’s Modulus

2900 MPa



Flexural Strength

103 MPa

Flexural Modulus

2500 MPa

Hardness Shore D

67 D

Notched Izod

28 J/m

Heat Deflection Temp @ 0.45 MPa

78 ºC

1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used.

2 Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 and Form 3B (impact and thermal measurements) printers with 100 µm BioMed Amber Resin settings, washed in a Form Wash for 20 minutes in 99% Isopropyl Alcohol.

3 BioMed Amber Resin was tested at NAMSA World Headquarters, OH, USA.