A new wave of independent manufacturing and prototyping starts now with the Fuse 1. Bring production-ready nylon 3D printing onto your benchtop with an affordable, compact selective laser sintering (SLS) platform.
Printer starting from £13,999. Complete setup starting from £23,925.
A Convenient, Intuitive Workflow
Use Formlabs PreForm print preparation software (free to download and try) to import STL or OBJ part files, orient and arrange models, estimate print times, monitor your printers, and upload job files.
PreForm’s part packing algorithms can automatically arrange many models in a build.
During setup and printing, an intuitive Touch UI walks you through every step.
The touchscreen displays a live stream of the print bed so you can watch each new layer take shape. This camera view is also available from your computer in PreForm so you can monitor your print without leaving your desk.
Track printers, teams, and supplies via the cloud-based Dashboard.
SLS 3D printing fuses nylon powder layer by layer. The unused powder supports the parts during printing so you can create complex, interconnecting designs with no need for support structures.
With patent pending Surface Armor technology, a semi-sintered shell that prints around the surface of the part, the Fuse 1 provides competitive mechanical properties and surface finish without the prohibitive cost or hassle of competitor systems.
Our all-in-one powder recovery station, Fuse Sift, combines part extraction, powder recovery, storage, and mixing in a single device.
Produce fully-functional parts at a 30% powder refresh rate—with unlimited cycles. This means you can print with up to 70% recycled powder.
Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.
Add a second removable build chamber, compatible with the Fuse 1 and Fuse Sift, to enable continuous printing and reduce downtime.
Industry leading cooldown times allow you to start a print 1–2 hours after your previous print has finished.
Strong, Functional Materials
3D print production-ready, end-use parts with our family of Nylon Powders, developed specifically for the Fuse 1. Our materials, hardware, and software are developed and validated together to deliver peak performance while optimizing cost per part.
Nylon 12 and Nylon 11 available now. Many other materials in development.