3D printed colorful computer game controller

Why Choose Color Base Resin?

Restock on Color Base Resin to create color models right off the printer with pigments available in Color Kit.


A Perfect Foundation

Pair Color Base Resin and Color Kit to create consistent colors throughout the entire part.


Minimize Waste

Use every bit of Color Pigment by replenishing your Color Base Resin.


Smooth Surface Finish

Print parts that have the polish and finish of a final product.

Applications

Color Base Resin paired with Color Kit is ideal for field testing aesthetic prototypes and concept models.

Consider Color Base Resin for:

Solid color parts with a matte finish
Looks-like prototypes
Concept models
Props and figurines

16 Recipes, Infinite Potential

Cherry
Form X Product
RGB

218, 89, 89

HEX

#DA5959

Cherry
Pigment Recipe
  • Cyan0mL
  • Magenta65mL
  • Yellow35mL
  • Black0mL
  • White0mL

Material Properties*

Color Base Resin

Ultimate Tensile Strength

65 MPa

Tensile Modulus

2.6 GPa

Elongation

6%

Flexural Modulus

2.2 GPa

Notched Izod

25 J/m

Heat Deflection Temp @ 0.45 MPa

73 ºC

Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 2, 100 μm, Clear settings and post-cured with 1.25 mW/cm³ of 405 nm LED light for 60 minutes at 60°C.

Post-Processing

Form Wash Settings

Duration

10 minutes

Notes

When using a single wash bucket, residue from previously washed parts deposits on part surfaces. If washing darker-colored materials like Black Resin in the same wash bucket as lighter-colored materials like White Resin or Clear Resin, some color transfer may occur.

Form Cure Settings

Duration

30 min

 

Temperature

60 °C

Notes

All standard opaque Formlabs resins (including Grey, Black, White, Color, and Model Resin) have equivalent mechanical properties. While the recommended post-cure time is 30 minutes, post-curing for 60 minutes will result in a small additional gain in tensile modulus. This post-cure setting can be used with any of these resins.