Why Choose Custom Tray Resin?
Custom Tray Resin is a production-ready material that enables highly accurate definitive impressions.
High Throughput
Print full impression trays quickly using 200 micron layer heights, reducing labor time.
Accurate
Provide consistent and accurate impressions for patient-matched trays with a digital workflow.
Made-to Measure
Create ideally fit definitive models for complex cases.
Biocompatibility
Provide the patient and clinician the peace of mind they deserve.
Applications
Leverage Custom Tray Resin to take highly accurate definitive impressions for crown and bridge, implant, dentures, and comprehensive cases.
Consider Custom Tray Resin for:
Material Properties*
Custom Tray Resin
Ultimate Tensile Strength
Young's Modulus
Elongation
Hardness Shore A
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 printer with 200 μm Custom Tray Resin settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol, and post-cured at 60°C for 30 minutes in a Form Cure.
Post-Processing
Form Wash Settings
10 min in IPA
To ensure that finished parts are biocompatible, follow all part washing notes in the Instructions for Use. Maintain separate wash buckets for biocompatible materials.
Form Cure Settings
30 min
60 °C
Post-curing as recommended in the material-specific Instructions for Use is required to ensure optimal performance and biocompatibility of 3D printed dental appliances.
