Form Cure L V2 230V
Form Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.
Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.
Form Cure L V2 230VFHL-CU-230V-02
Post-Cure Most Large Resin Parts in 60 Seconds
Rapid curing and quick heat up for consistent, validated results and effortless post-curing of large resin 3D prints.
Blazing Fast Curing
5-6x faster cure cycles and 40% quicker heat up times than the previous generation.
Near instant heat-up
60 °C in 150 seconds*
80 °C in 360 seconds*
*(230V version)
Fast curing
General Purpose Resins in 60 seconds
Engineering & Biocompatible Resins in 3-15 minutes
Consistent, validated results
Optimized for reliable and repeatable curing performance.
Convection heating system that reaches temperatures up to 100 °C with 96 multi-directional LEDs that provide a uniform irradiance of 14.5 mW/cm2.
Post-Cure large parts
Designed to fit everything from the largest Form 4L parts to full production batches.
- 353 mm x 196 mm x 365 mm
- 404 mm diameter rotating turntable
- Maximum part height 365 mm
Easier Than Ever
Compact new design makes curing as easy as pushing a button, completing the Form 4L Ecosystem.
- 45+ pre-programmed cure profiles
- Easy-to-clean glass turntable
- 26% smaller footprint while curing 19% larger parts
Form 4L Workflow in Minutes
Form Cure L is part of a 3D printing ecosystem that’s easy to learn and use, and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4L, from software, to materials, printing, and post-processing.
Tech Specs
| Parameter | Form Cure L V2 | Form Cure L V1 | Form Cure V2 | Form Cure V1 |
|---|---|---|---|---|
| Printer Compatibility | Form 4L, Form 4BL, Form 4, Form 4B, Form 3/B/+, Form 2 | Form 4, Form 4B, Form 3/B/+, Form 2 | Form 4, Form 4B, Form 3/B/+, Form 2 | Form 3/B/+, Form 2 |
| Dimensions | 507 × 543 × 545 mm 20.0 × 21.4 × 21.5 in |
690 x 540 x 445 mm 27.2 x 21.3 x 17.5 in |
337 × 404 × 372 mm 13.3 × 14.0 × 15.9 in |
262 x 262 x 340 mm 10.3 x 10.3 x 13.4 in Height when open: 640 mm (25.2 in) |
| Weight | 40.0 kg 88.2 lb |
24 kg 53 lb |
12.1 kg 26.7 lb |
5.6 kg 12.4 lb |
| Turntable Dimeter | 404 mm 15.9 in |
395 mm 15.6 in |
235 mm 9.25 in |
193 mm 7.6 in |
| Maximum Part Height | 365 mm 14.4 in |
320 mm 12.6 in |
245 mm 9.64 in |
185 mm 7.28 in |
| Maximum Cure Chamber Temperature | 100 °C 212 °F |
80 °C 176 °F |
100 °C 212 °F |
80 °C 176 °F |
| Light Source | 96 multi-directional LEDs | 45 multi-directional LEDs | 48 multi-directional LEDs | 13 multi-directional LEDs |
| LED Power | 350 W | 70 W | 150 W | 39 W |
| LED Radiant | 120 W | 36 W | 50 W | 9.1 W |
| LED Wavelength | 405 nm | 375 nm, 405 nm | 405 nm | 405 nm |
| Power Requirements | Input (NA): 100 – 125 VAC, 50–60Hz, 15 A Input (EU): 220 – 240 VAC, 50–60Hz, 8 A |
Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A |
Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A |
90–240 V 6.0 A 50/60 Hz 144 W |