Formlabs Resin Washing Solution (5 L)
- Compatible Printer
- Form 4, Form 4B, Form 3, Form 3L, Form 3B, Form 3BL, Form 2
Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.
Formlabs Resin Washing Solution is recommended with Form Wash and Form Wash L.
Note
Formlabs Resin Washing Solution is compatible with most non-biocompatible Formlabs Resins. See the full list on this page below.
- Compatible Printer
- Form 4, Form 4B, Form 3, Form 3L, Form 3B, Form 3BL, Form 2
Formlabs Resin Washing Solution (5 L)SLN-RW-01
Why Choose Formlabs Resin Washing Solution
Stable and Cost-Effective
Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash.
Validated Non-Flammable
Non-flammable per GHS classification, mitigating storage and EH&S concerns.
Longer Solution Lifetime
Twice the longevity of IPA and minimal evaporation, leading to less frequent top-offs and full changeouts of washing solution.
Simplified Sourcing
Whether you buy Formlabs or our partners, you can now get your resins and washing solution all in one place.
Using Formlabs Resin Washing Solution
Utilize the following workflow for best success with Formlabs Resin Washing Solution.
*Volume Requirements:
Form Wash V2: 3 units (15 liters)
Form Wash L: 8 units (40 liters)
Step 1
Wash Part
According to material recommendations.*
Step 2
Water Soak
30-60 seconds. No agitation required. Soak parts within 8 hours of washing to prevent part swelling.
Step 3
Accelerated Dry or Air Dry
Use compressed air for 30-60 seconds, a fan for 30-120 minutes, or air dry for 4-6 hours.
Step 4
Cure Part
According to material recommendations.
Resin Washing Solutions Comparison
| Solution | Fully non - flammable workflow | Cost $ / L | Saturation Limit | Solution amount lost to evaporation* | Solution Lifetime* (days) | Cost per wash ($USD) |
|---|---|---|---|---|---|---|
| IPA | No | $7.67 | 10% | 1.18 L | 97 | $1.08 |
| Formlabs Resin Washing Solution | Yes | $15.00 | 20% | ~ 0 L | 240 | $0.91 |
| Non-Flammable Competitor | Yes | $28.00 | 20% | ~ 0 L | 240 | $1.69 |
| Competitor High-Saturation Limit Solution | No - requires secondary flammable solvent | $52.50** | 35% | ~ 0 L | 420 | $1.81 |
*Assuming 1 print per day.
**Secondary flammable solvent is factored into cost.
Compatibility
Formlabs Resin Washing solution is compatible with most non-biocompatible Formlabs Resins.
| General Purpose | Engineering | Casting | Dental |
|---|---|---|---|
| Clear Resin | Durable Resin | Castable Wax 40 Resin | Precision Model Resin |
| Grey Resin | Tough 1000 Resin | Clear Cast Resin | Model Resin |
| White Resin | Tough 1500 Resin | ||
| Black Resin | Tough 2000 Resin | ||
| Fast Model Resin | Rigid 4000 Resin | ||
| Draft Resin | Rigid 10K Resin | ||
| Grey Pro Resin | High Temp Resin | ||
| ESD Resin |
Formlabs Resin Washing solution is not compatible with the Flexible and Elastic Resin family, or resins that require a validated workflow (biocompatible resin, Flame Retardant Resin, etc.).