Temporary CB Resin (Form 3)

RS-F2-TC-PKG

Estimated delivery: Apr 29 - May 5

Pick A Shade

Temporary CB Resin est une résine dentaire colorée pour l’impression 3D de restaurations temporaires telles que des couronnes, des bridges, des inlays, des onlays et des facettes. Ce matériau permet de réaliser des bridges d’une portée pouvant aller jusqu’à sept dents et est disponible en cinq teintes. Il est robuste, esthétique et offre une excellente adaptation marginale.

Utilisez les colles temporaires traditionnelles pour fixer les restaurations fabriquées en Temporary CB Resin. Ces restaurations peuvent rester en bouche jusqu’à 12 mois. Les restaurations créées de manière numérique permettent un processus de collaboration rapide entre le dentiste, le prothésiste et le patient.

Lisez notre guide d'application pour connaître le flux de travail complet et les meilleures pratiques pour réaliser des restaurations temporaires sur votre imprimante 3D Formlabs.
  • Pick A Shade
Crowns, onlays, inlays and bridges in Temporary CB Resin

Why Choose Temporary CB Resin?

Temporary CB Resin is a highly filled material that's validated for comfortable, aesthetic, and temporary restorations.


Esthétique

Provide tooth-colored prosthetics, available in five shades.


Efficace

Enable a quick, collaborative process between dentist, technician and patient with digitally created restorations.


Precise Fit

Enhance patient comfort with precisely fit temporaries with excellent marginal adaptation, strength, and aesthetics.


Temporary Biocompatibility

Restorations may remain in the mouth for up to 12 months.

Applications

Temporary CB Resin is used to produce precisely fitting temporaries with a smooth surface finish, high resolution, and dimensional stability.


Consider Temporary CB Resin for:

Bridges (up to 7 units)
Facettes
Inlays
Couronnes
Onlays

Propriétés des matériaux*

Temporary CB Resin

Densité

1,4–1,5 g/cm^3

Viscosité

2500-6000 MPa*s

Résistance à la flexion

≥ 100 MPa

* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Test samples were printed with a Stainless Steel Build Platform on a Form 2 and Form 3B printer with 50 μm Temporary CB Resin settings. The printed samples were post-processed as recommended in the Instructions for Use. Data for post-cured samples were measured on 3 point bending test specimens according to EN ISO 10477 and EN ISO 4049 standards. Screen reader support enabled.

Temporary CB C2 Resin cartridge

Temporary CB Resin