Sift 300 Sieve
Nylon 11 CF Powder requires a 300 micron sieve for the Fuse Sift.
Why Choose Nylon 11 CF Powder
Nylon 11 CF Power is a carbon-fiber reinforced material, ideal to produce stiff, strong, and lightweight end-use parts.
Carbon Fiber-Filled
Produce high-performance composite parts for strenuous end-use applications.
Stiff & Strong
Get the best of both worlds with the rigidity of carbon fibers and the ductility of nylon 11.
Lightweight
Push the limits of design with a high strength-to-weight ratio on top of the geometric freedom of 3D printing.
High Thermal Stability
Deliver heat-resistant parts for long-term use that maintain dimensional accuracy over time and can take repeated impact.
Applications
Nylon 11 CF Powder is our highest performance material for the Fuse 1+ 30W. Choose this material for parts that need to be strong, lightweight and stable over time, even at elevated temperatures.
* Material properties may vary based on part design and manufacturing practices. It is the manufacturer’s responsibility to validate the suitability of the printed parts for the intended use.
Compare Printability of SLS Powders
| Nylon 12 (Recommended) | Nylon 12 Tough | Nylon 12 White | Nylon 11 | Nylon 12 GF | Nylon 11 CF | TPU 90A | |
|---|---|---|---|---|---|---|---|
| Air/ Inert Recommendation | Air | Air | Nitrogen* | Nitrogen** | Air | Nitrogen | Air |
| Refresh Rate | 30% | 20% | 30% | 30% | 50% | 30% | 20% |
| Printer Compatibility | Fuse 1 Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1 Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1 Fuse 1+ 30W |
| Dimensional Accuracy | Best | Best | Good | Good | Best | Good | Fair |
| Surface Finish | Best | Good | Good | Good | Best | Good | Fair |
| Print Speed | Best | Good | Fair | Fair | Fair | Fair | Good |
| Fine Feature Resolution | Best | Best | Good | Fair | Fair | Fair | Good |
| High Aspect Ratio Parts | Best | Best | Best | Fair | Good | Good | Fair |
| Large Cross Section Parts | Good | Best | Good | Fair | Good | Good | Fair |
* Nylon 12 White Powder is recommended to print in nitrogen to maintain the most consistent white appearance. Printing in air has been correlated with yellowing of powder over time. Powder yellowing has little to no impact on the ability and efficacy of dyeing printed parts.
** Nylon 11 Powder is recommended to print in nitrogen environment. Printing in air is possible, but will compromise material properties and lead to powder degradation at a faster rate.
Post-Processing
Post-processing with the Fuse Sift powder recovery station and a media blasting station is recommended. To learn more about post-processing SLS prints, download our workflow guide.
Bulk Powder Pricing for Your Lowest Cost Per Part
3D printing is now cost-effective even at higher volumes thanks to substantial volume discounts for our SLS Powders. Discounts start at 20% for customers purchasing 50 kg of powder in bulk and prices can reach as low as $45 per kilogram.
Related Items
