Fuse Blast
FS1-FB-01
Estimated delivery: Jun 18 - 23
Achieve professional, consistent parts that are clean to the touch faster and easier than ever before with Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts.
Fuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts in as little as 15 minutes and drastically reducing labor time and cost.
Accessories:
- Polishing System: Takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.
- High Capacity Kit: Clean large parts printed on Fuse X1 and process over 50% more parts per cycle, cutting batch time and labor for high-volume builds.
- Fuse Blast
Why Choose Fuse Blast
Fuse Blast delivers 100% hands-off cleaning and polishing for SLS parts.
Finished Parts In 15 Minutes
Cleaning routines automatically post-process an entire build chamber in as little as 15 minutes, while the passive filtering reduces media saturation and extends media life to save on overhead costs.
Consistent Results
Pre-programmed routines take out the guesswork for consistent results, while manual mode allows you to adapt to any part requirements.
Professional Parts
Deliver clean-to-the-touch parts thanks to the in-line ionizer that prevents dust and media from re-settling on your parts, or get the most out of your SLS prints with the Fuse Blast Polishing System for smooth, semi-gloss, scuff-resistant, and dye-ready surface finishes.
Streamlined Post-Processing
Fuse Blast seamlessly integrates into the Fuse ecosystem for an automated post-processing workflow that reduces labor time by 80% and delivers finished parts in as little as 15 minutes.
Features
Fuse Blast is a fast, automated solution that delivers professional results, consistently.
Fuse Blast Polishing System
The Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts. With the Polishing System, users can create parts for consumer-facing, end-use applications with improved feel and appearance.
This single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast.
Fuse Blast Tech Specs
| Parameter | Fuse Blast |
|---|---|
| Printer Compatibility | Fuse Series SLS 3D Printers Third-party powder bed fusion 3D printers |
| Minimum Dimensions for Convenient Access (W × D × H) | 145 × 150 × 210 cm 57.4 × 59.6 × 82.6 in |
| Dimensions (W x D x H) | 100 × 75 × 175 cm 39 × 29.6 × 68.7 in Height when open: 195 cm (76.8 in) |
| Weight | 164 kg (without blasting media) 360 lb (without blasting media) |
| Media Hopper Capacity | Media hopper capacity 8.3 L: 13 kg of 200-300 µm glass media 5.2 kg of Polishing Media |
| Waste Hopper Capacity | 10.6 L |
| Operating Environment | 10–36 ºC 50–96.8 ºF Elevation up to 7500 ft / 2286 meters |
| Air Handling | Negatively pressurized hood with replaceable HEPA filter Independent venting system |
| Power Requirements | EU: 230 VAC, 3 A US: 120 VAC, 6 A |
| Compressed Air Requirements | Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar. Regulate pressure input between 90-120 PSI / 6-8 bar. Typically achieved by a single 4 HP compressor. |
| Connectivity | Wi-Fi: 2.4 GHz Ethernet: 1000 Mbit USB: 2.0 |
| Wi-Fi Connectivity | Protocol: IEEE 802.11 b/g/n Frequency: 2.4 / 5.0 GHz Supported security: WPA/WPA2 |
| Ethernet Connectivity | RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T. |
| USB Connectivity | USB (rev 2.0) C port with a USB A-C or C-C cable |
| Sound Emission | Does not exceed 75 dB(A). |
| Product Control | Interactive touchscreen, foot pedals for manual control. |
| Included Accessories | Transfer container Control pedals ESD wrist strap 7 mm socket wrench Blast orifice (3 mm) Blast orifice (4 mm) T-20 driver Floor mat |
| Tumbling Basket | 450 mm internal diameter (Fits a full Fuse Series build volume) |
| Internal Work Area (W x D x H) | 71 x 55 x 67 cm 27.9 x 21.6 x 26.3 in |
| Accessible Work Area (W x D x H) | 57 x 50 x 67 cm 22.4 x 19.6 x 26.4 in (basket removed) |
