Formlabs Resin Washing Solution (5 L)
SLN-RW-01
Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.
Formlabs Resin Washing Solution is recommended with the Form Wash (2nd Generation) and Form Wash L.
*Based on GHS Classification
- Formlabs Resin Washing Solution (5 L)
Why Choose Formlabs Resin Washing Solution
Stable and Cost-Effective
Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash.
Validated Non-Flammable
Non-flammable per GHS classification, mitigating storage and EH&S concerns.
Longer Solution Lifetime
Twice the longevity of IPA and minimal evaporation, leading to less frequent top-offs and full changeouts of washing solution.
Simplified Sourcing
Whether you buy Formlabs or our partners, you can now get your resins and washing solution all in one place.
Using Formlabs Resin Washing Solution
Utilize the following workflow for best success with Formlabs Resin Washing Solution.
Wash Part
Water Soak
Accelerated Dry or Air Dry
Cure Part
*Volume Requirements:
Form Wash (2nd Generation): 3 units (15 liters)
Form Wash L: 8 units (40 liters)
Resin Washing Solutions Comparison
Solution | Fully non - flammable workflow | Cost $ / L | Saturation Limit | Solution amount lost to evaporation* | Solution Lifetime* (days) | Cost per wash ($USD) |
---|---|---|---|---|---|---|
IPA | No | $7.67 | 10% | 1.18 L | 97 | $1.08 |
Formlabs Resin Washing Solution | Yes | $15.00 | 20% | ~ 0 L | 240 | $0.91 |
Non-Flammable Competitor | Yes | $28.00 | 20% | ~ 0 L | 240 | $1.69 |
Competitor High-Saturation Limit Solution | No - requires secondary flammable solvent | $52.50** | 35% | ~ 0 L | 420 | $1.81 |
*Assuming 1 print per day.
**Secondary flammable solvent is factored into cost.
Compatibility
Formlabs Resin Washing solution is compatible with most non-biocompatible Formlabs Resins.
General Purpose | Engineering | Casting | Dental |
---|---|---|---|
Clear Resin | Tough 2000 Resin | Castable Wax 40 Resin | Precision Model Resin |
Grey Resin | Tough 1500 Resin | Clear Cast Resin | Model Resin |
White Resin | Rigid 10K Resin | ||
Black Resin | Rigid 4000 Resin | ||
Fast Model Resin | Durable Resin | ||
Draft Resin | High Temp Resin | ||
Grey Pro Resin | ESD Resin |
Formlabs Resin Washing solution is not compatible with the Flexible and Elastic Resin family, or resins that require a validated workflow (biocompatible resin, Flame Retardant Resin, etc.).