Form Cure V2 230V
Form Cure V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.
Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.
Form Cure V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.
Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.
Tech specs
- Compatible Printer
- Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form 2, Form Studio 1
- Post-Processing
- Automated
- Turntable Diameter
23.5 cm
9.25 in
Tech specs
- Compatible Printer
- Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form 2, Form Studio 1
- Post-Processing
- Automated
- Turntable Diameter
23.5 cm
9.25 in
Ready to orderForm Cure V2 230V
Cure Most Parts in 60 Seconds
Rapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints.
Blazing Fast Curing
5-6x faster cure cycles and 40% quicker heat up times than the previous generation.
Near Instant Heat-Up
60 °C in 150 seconds*
80 °C in 360 seconds*
*(230V version)
Speed Up Workflows for All Resins
General Purpose Resins in 60 seconds
Engineering & Biocompatible Resins in 3-15 minutes
Consistent, Validated Results
Optimized for reliable and repeatable curing performance.
- Convection heating system that reaches temperatures up to 100 °C
- 48 multi-directional LEDs that provide a uniform irradiance of 14.5 mW/cm2
Fully Compatible With Form 4
Designed to fit an entire Form 4 build, anything from large parts to full production batches.
- 235 mm rotating turntable
- 245 mm maximum part height
Easier Than Ever
Sleek new design and a compact footprint make curing as easy as pushing a button.
- 45+ pre-programmed cure profiles
- Easy-to-clean glass turntable
- Side-hinged door to allow easy access
Form 4 Workflow in Minutes
Form Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.
Tech Specs
| Parameter |
Form Studio Wash+Cure |
Form Cure V2 | Form Cure V1 | Form Cure L V2 | Form Cure L V1 |
|---|---|---|---|---|---|
| Printer Compatibility |
Form Studio 1, Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2 |
Form 4, Form 4B, Form Studio 1, Form 3/+, Form 3B/+, Form 2 | Form 3/+, Form 3B/+, Form 2 | Form 4L, Form 4BL, Form 4, Form 4B, Form Studio 1, Form 3L, Form 3BL, Form 3/+, Form 3B/+, Form 2 | Form 4L, Form 4BL, Form 4, Form 4B, Form Studio 1, Form 3L, Form 3BL, Form 3/+, Form 3B/+, Form 2 |
| Dimensions |
33 x 30 x 44 cm 13 x 11.8 17.3 in |
33.7 × 40.4 × 37.2 cm 13.3 × 14.0 × 15.9 in |
26.2 x 26.2 x 34.0 cm 10.3 x 10.3 x 13.4 in Height when open: 64 cm (25.2 in) |
507 × 543 × 545 mm 20.0 × 21.4 × 21.5 in |
69.0 x 54.0 x 44.5 cm 27.2 x 21.3 x 17.5 in |
| Weight | 9 kg 19.8 lb |
12.1 kg 26.7 lb |
5.6 kg 12.4 lb |
40.0 kg 88.2 lb |
24 kg 53 lb |
| Turntable Diameter |
24.0 cm 9.45 in |
23.5 cm 9.25 in |
19.3 cm 7.6 in |
404 mm 15.9 in |
39.5 cm 15.6 in |
| Maximum Part Height |
22.5 cm 8.9 in |
24.5 cm 9.64 in |
18.5 cm 7.28 in |
365 mm 14.4 in |
32 cm 12.6 in |
| Maximum Cure Chamber Temperature | N/A - No Heater | 100 °C 212 °F |
80 °C 176 °F |
100 °C 212 °F |
80 °C 176 °F |
| Light Source | 24 multi-directional LEDs | 48 multi-directional LEDs | 13 multi-directional LEDs | 96 multi-directional LEDs | 45 multi-directional LEDs |
| LED Power | 48 W | 150 W | 39 W | 350 W | 70 W |
| LED Radiant | 27.8 W | 50 W | 9.1 W | 120 W | 36 W |
| LED Wavelength | 405 nm | 405 nm | 405 nm | 405 nm | 375 nm, 405 nm |
| Power Requirements |
Input: 100–240 VAC, 50/60 Hz, maximum 7A Output: 24 VDC, 60 W |
Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A |
90–240 V 6.0 A 50/60 Hz 144 W |
Input (NA): 100 – 125 VAC, 50–60Hz, 15 A Input (EU): 220 – 240 VAC, 50–60Hz, 8 A |
Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A |