Before receiving your device, prepare a space to install and operate the Form Wash L and Form Cure L as well as house the necessary accessories and consumables. Choose a location separate from any machinery or tooling that generates dust or sparks, such as wood or metal working equipment.

Reserve the following minimum dimensions for the most convenient access (W × D × H):

• Form Wash L V1: 100 × 120 × 120 cm (40 × 48 × 48 in)
• Form Wash L V2: 100 × 120 × 120 cm (40 × 48 × 48 in)
• Form Cure L V1: 90 × 85 × 55 cm (35.5 × 33.5 × 21.7 in)
• Form Cure L V2: 60 × 110 × 56 cm (23.6 × 43.3 × 22.0 in)
• Additional space for other devices and post-processing tools (e.g., Form 4L, Form 3L, Form 3BL, or Formlabs-approved third-party devices)

The Form Wash L V1 and Form Wash L V2 require a power source that meets the following requirements:

• Input (NA): 100–120 VAC, 50–60 Hz, 1 A max
• Input (EU): 220–240 VAC, 50–60 Hz, 1 A max

The Form Cure L V1 and Form Cure L V2 require a power source that meets the following requirements:

• Input (NA): 100–120 VAC, 50–60 Hz, 15 A max
• Input (EU): 220–240 VAC, 50–60 Hz, 8 A max

Aside from the contents of the package, you need additional supplies to post-process your printed parts. Prepare your workspace by purchasing them in advance:

• Isopropyl alcohol (90% or higher) and/or tripropylene glycol monomethyl ether
• Low-fiber paper towels
• Non-abrasive microfiber cloth
• Non-reactive nitrile gloves
• PEC*PADs
• Safety glasses