Alpha Fast Resin
Alpha Fast Resin is a fast-printing general purpose resin with print speeds up to 130 mm/h, for iterative prototypes in minutes or print the entire build volume on Form Studio 1 in less than two hours.
Build prototypes faster or rapidly create jigs, fixtures, and tooling with a tensile strength of 46 MPa and 34% elongation at break.
The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.
Alpha Fast Resin is only supported on the Form Studio 1.
Alpha Fast Resin is a fast-printing general purpose resin with print speeds up to 130 mm/h, for iterative prototypes in minutes or print the entire build volume on Form Studio 1 in less than two hours.
Build prototypes faster or rapidly create jigs, fixtures, and tooling with a tensile strength of 46 MPa and 34% elongation at break.
The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.
Alpha Fast Resin is only supported on the Form Studio 1.
Tech specs
- Compatible Tank
- Form Studio Resin Tank
- Compatible Build Platform
- Form Studio Standard Build Platform, Form Studio Flex Build Platform
- Compatible Printer
- Form Studio 1
- Print Technology
- SLA
- Ultimate Tensile Strength
46 MPa
- Tensile Modulus
2230 MPa
- Flexural Strength
78 MPa
- Flexural Modulus
2110 MPa
- Notched Izod
37 J/m
- Elongation at Break
34 %
- Heat Deflection Temp. @ 0.45 MPa
59 ℃
- Key Characteristics
Fastest printing
- Primary Layer Height
150 μm
- Average Print Speed
90 mm/h
- Recommended Applications
Rapid prototyping, jigs, and fixtures
Tech specs
- Compatible Tank
- Form Studio Resin Tank
- Compatible Build Platform
- Form Studio Standard Build Platform, Form Studio Flex Build Platform
- Compatible Printer
- Form Studio 1
- Print Technology
- SLA
- Ultimate Tensile Strength
46 MPa
- Tensile Modulus
2230 MPa
- Flexural Strength
78 MPa
- Flexural Modulus
2110 MPa
- Notched Izod
37 J/m
- Elongation at Break
34 %
- Heat Deflection Temp. @ 0.45 MPa
59 ℃
- Key Characteristics
Fastest printing
- Primary Layer Height
150 μm
- Average Print Speed
90 mm/h
- Recommended Applications
Rapid prototyping, jigs, and fixtures
Ready to orderAlpha Fast Resin
Why Choose Alpha Fast Resin
Blazing Fast
Iterate faster with print speeds up to 130 mm/h, for printing small components in minutes or the entire build volume in less than two hours.
Speed Without Compromising Reliability
Print settings are rigorously tested by Formlabs, so printing fast doesn't come at the expense of print success.
Engineering-Grade performance
Exceed the strength and toughness of ABS-like resins and ABS filaments with a 46 MPa ultimate tensile strength and a 34% elongation of break.
Print with Confidence
The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first resin printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.
Applications
Rapid iteration on prototypes to refine form, fit and function.
Jigs, fixtures, and organizers that print in minutes.
Initial prototypes for shape and feel.
Large parts printed in under two hours.
Resin Printing with Confidence
Low VOC Emissions
The Alpha Resins are the first resin printing materials to achieve UL GREENGUARD Gold*, an independent standard certifying low VOC emissions for homes, offices, schools, and other indoor environments. This certification is for the printing process - not just for a final part.
*when printed on Form Studio 1 using VOC Extractor
Skin-Safe Parts
Post-processed parts meet requirements for long-term (>30 day) skin contact, in accordance with ISO 10993, meaning they can be used in wearables and high-contact applications.
Minimize Risks
Liquid resin scored as non-skin irritant according to OECD 439, a standard commonly used in cosmetics industry, to minimize the risks from incidental skin contact with resin.
Low-Odor Components
Formulated using low-odor chemicals, ensuring a pleasant printing experience.
Material Properties
| Parameter | Post-cured at room temperature for 5 minutes, Form Studio Wash+Cure |
|---|---|
|
Ultimate Tensile Strength |
46 MPa |
|
Tensile Modulus |
2230 MPa |
|
Elongation at Break |
34 % |
|
Notched Izod |
37 J/m |
|
Heat Deflection Temperature at 0.45 MPa |
59 ℃ |
Alpha Fast Resin is a fast-printing general purpose resin with print speeds up to 130 mm/h, for iterative prototypes in minutes or print the entire build volume on Form Studio 1 in less than two hours.
Build prototypes faster or rapidly create jigs, fixtures, and tooling with a tensile strength of 46 MPa and 34% elongation at break.
The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.
Alpha Model Fast is only supported on the Form Studio 1.
Alpha Model Resin is a supremely detailed resin with a deep, fully matte, neutral surface that captures every detail, down to the finest crevices and textures.
Create detailed scale models, life-like sculptures, and richly textured miniatures with thin features that flex instead of snapping, so finished models survive painting, transport, and drops.
The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.
Alpha Model Resin is only supported on the Form Studio 1.
Fastest printing
Best fine features and most matte finish
150 μm
50 μm
90 mm/h
13 mm/h
Rapid prototyping, jigs, and fixtures
Scale models, figurines, sculptures, and busts
FAQ
Alpha Fast Resin is the fastest-printing material in the Formlabs Alpha Resin Family. It reaches speeds of up to 130 mm/h, so you can print small components in minutes or fill the entire build volume in under two hours. It's built for makers who want a quick turnaround from their desktop 3D printer.
Alpha Fast Resin is well suited for these uses:
- Rapid prototyping to refine form, fit, and function
- Initial prototypes for shape and feel
- Jigs, fixtures, and organizers that print in minutes
- Large parts printed in under two hours
Alpha Fast Resin averages 90 mm/h at a 150 μm layer height and reaches up to 130 mm/h at 250 μm. Print settings are rigorously tested by Formlabs, so speed doesn't come at the expense of print success.
Yes. For makers who want a 3D printer for home projects like organizers, paint holders, brackets, and quick fixes, Alpha Fast Resin turns ideas into usable parts in minutes
Choose Alpha Fast Resin when speed is the priority, such as for iterating on designs, printing functional parts, or filling a build plate quickly. For display-ready surfaces and a balance of speed and aesthetics, choose Alpha Black, White, Grey, or Clear. For the finest detail on miniatures and figurines, choose Alpha Model Resin.
Yes. Alpha Fast Resin is formulated with low-odor chemicals. Alpha Resins are the first resin printing materials certified UL GREENGUARD Gold for low VOC emissions when printed on Form Studio 1 using VOC Extractor.
Post-processed parts meet ISO 10993 requirements for long-term (more than 30 days) skin contact. The liquid resin scored as a non-skin irritant under OECD 439.
Wash parts in clean ≥90% IPA or Formlabs Resin Washing Solution and air dry for at least 30 minutes before handling. Post-curing is optional but recommended to reach full strength. Settings are available for Form Studio Wash + Cure, Form Wash, Form Wash L, and Form Cure units.
Alpha Fast Resin is designed for Form Studio 1.
Post-Processing
Washing
The foundational step in any SLA post-processing workflow is to remove any excess resin on the surface of the parts through a solvent wash.
Use clean ≥ 90% IPA, or use Formlabs Resin Washing Solution.
For the best surface finish, Formlabs recommends allowing parts printed in Alpha Resins to air dry for at least 30 minutes after washing, before handling.
SETTINGS
Form Studio Wash+Cure | Form Wash | Form Wash L
Curing
Post-curing Alpha Resins is optional, but recommended, for parts to achieve their full strength and functionality. This step completes the chemical reaction initiated during printing, transforming the part from its green state into a fully finished component.
SETTINGS
Form Studio Wash+Cure | Form Cure V1 | Form Cure V2 | Form Cure L V1 | Form Cure L V2