Post-Processing

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Washing mode: All resin 3D printed parts need washing to remove residual resin. Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning. When washing is done, simply raise the internal basket out of the solvent to let parts air dry and avoid over-soaking, warped prints.

Curing mode: Using 405 nm light, Form Studio Wash+Cure completes the chemical reaction started during printing. Post-curing boosts part strength, toughness, heat resistance, and creep resistance, while leaving a harder, less tacky surface.

Form Studio Wash+Cure is compatible with IPA, TPM, and Resin Washing Solution.

Scale your post-processing throughput with the Fuse Blast High Capacity Kit, a drop-in upgrade for Fuse Blast that processes over 50% more parts per cycle than the standard basket. It's the recommended configuration for Fuse X1 users and multi-Fuse 1 Series fleets running large, frequent batches.

A wider 400 mm opening makes loading and unloading easier and more ergonomic, while the added volume prevents the overcrowding that can damage parts mid-cycle. Swap it into your existing Fuse Blast in minutes, with no tools or machine modifications required.

Fuse Blast High Capacity Kit pairs the Large Tumbler Basket with an extra Fuse Blast Large Tumbler Basket Liner Kit, so high-volume users can replace the liner without any downtime waiting on a separate order.

Ceramic Wash Solution is a specialized wash solvent for cleaning your ceramic 3D printed parts. A wash in this solution is required for parts printed in Alumina 4N Resin.

Ceramic Wash Solution is non-hazardous and non-flammable. Download the Safety Data Sheet.

Bring SLA parts to the next level with Formlabs Finishing Tools: a curated set of post-processing solutions for SLA 3D printing that streamlines every step in the workflow from part and support removal to sanding, buffing, and polishing.

Curated by experienced engineers and validated by customers, these 3D printing finishing tools were designed to enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.

What’s Included:

• Pen Sander, Rotary tool, Bit kit, working mat, hobby knifes and other accessories

Put the finishing touches on your parts quickly and easily with the comprehensive Form 4 Finish Kit, while keeping your workspace clean and organized. Includes two rinse buckets, rinse basket, removal tool, plastic tank scraper, Build Platform jig, flush cutters, squeeze bottle, and disposable nitrile gloves.

Form Cure V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Form Cure V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Form Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Form Cure L V1 uses two 500W heaters and high-powered UV lights alongside a reflective inner cavity and rotating turntable to provide a consistent, high-intensity cure.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Form Cure L V2 is now available and offers blazing fast curing and near instant heat up with a larger chamber volume and compact footprint.

Form Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

All SLA 3D printed parts require washing to remove residual resin. Form Wash L automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents.

Keep parts directly on the Build Platform as you transition them from the printer to Form Wash L, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, Form Wash automatically raises parts out of the solvent so they can air dry, avoiding over-soaked, warped prints.

Use Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 4L build platform or two Form 4 build platforms with the included build platform adapter.

All SLA 3D printed parts require washing to remove residual resin. Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents.

Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, Form Wash automatically raises parts out of the solvent so they can air dry, avoiding over-soaked, warped prints.

Form Wash is compatible with all Formlabs desktop SLA 3D printers.

Achieve professional, consistent parts that are clean to the touch faster and easier than ever before with Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts. Fuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts in as little as 15 minutes and drastically reducing labor time and cost.

With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.

Fuse Sift is a safe, efficient powder recovery system for Fuse 1 Series SLS printers. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.

Fuse Sift is a safe, efficient powder recovery system for Fuse 1 Series SLS printers. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.

Fuse Blast Polishing Media consists of specially formulated plastic beads for use on the Fuse Blast to deliver smooth, semi-gloss, and dye-ready SLS parts.

The Polishing Media smooths parts by compacting the surface, unlike abrasive polishing or chemical surface melting. It is designed for longevity, lasting for over a hundred Blast cycles, while resisting the breakdown that occurs with glass media. The Polishing Media is larger and propelled at higher pressures than standard glass media.

For use with the Fuse Blast Polishing System.

The Fuse Blast Polishing Agent conditions the Fuse Blast Polishing Media to improve polishing quality and prevent media clogging. The Polishing Agent is a liquid solution that is diluted with water in the Polishing Module water tank. 7mL of agent diluted in 750mL of water will last approximately 6 hours of blasting.

For use with the Fuse Blast Polishing System.

Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.

Formlabs Resin Washing Solution is recommended with Form Wash and Form Wash L.

Solvent Pump is a battery-powered pump that quickly fills and empties a wash bucket for Form Wash. Solvent Pump eliminates the risk of chemical spills and simplifies your workflow.

This affordable, all-in-one manual post-processing kit allows you to easily clean SLS parts, and recover, sift, and mix used powder to prepare for the next print. Easily switch between materials without the hassle of cleaning machinery or gain access to a complete Fuse SLS ecosystem for low-volume production at an affordable price point.

This affordable, all-in-one manual post-processing kit allows you to easily clean SLS parts, and recover, sift, and mix used powder to prepare for the next print. Easily switch between materials without the hassle of cleaning machinery or gain access to a complete Fuse SLS ecosystem for low-volume production at an affordable price point.

The Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts.

This single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast.

Put the finishing touches on your parts quickly and easily with the comprehensive Form 4L Finish Kit, while keeping your workspace clean and organized. The cleaning tools kit includes a drying tray, tank tool, tweezers, scraper, removal tool, build platform jig, rinse bottle, battery-powered solvent pump, flush cutters, and disposable nitrile gloves. The large-scale rinse bucket allows you to rinse prints directly on the build platform or after removal.