Form Wash + Form Cure

Stronger Parts, Less Effort

The Form 3 workflow in five minutes

The Form 3+ Workflow in Five Minutes

The Form 3+ is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use the Form 3+, from the software and materials to printing and post-processing.

 

 

 

Automate Cleaning with Form Wash

Parts travel straight from the Form 3+ to Form Wash. Opt to go glove-free and keep parts directly on the build platform.

 

 

Set it and Forget it

Simply set the appropriate time and let Form Wash get to work.

15

Minutes

Approximate wash time when using fresh isopropyl alcohol (IPA)

8.6

Liters

IPA volume for removeable wash bucket

70

Prints

Amount of prints per IPA refill in regular use

 

While you’re away, parts are precisely agitated in IPA, getting every nook and cranny perfectly clean.

 

A Consistent, Automated Workflow

Once washing completes, Form Wash
automatically lifts parts out of the IPA,
avoiding over-soaked, warped prints. Parts
air dry and are ready when you are.
 

Form Wash

 

 

Included with Form Wash

Form Cure hydrometer

HYDROMETER

A custom hydrometer tool to
check IPA saturation.

Form cure storage

STORAGE

Behind the wash bucket to
keep finishing tools tidy.

Form cure siphon pump

SIPHON PUMP

Easy IPA transfer into and
out of the wash bucket.

 

 

Unlock Peak Performance

Form Cure is finely tuned to bring parts to their maximum mechanical properties.

80

Degrees Celcius

An advanced heating system precisely controls curing tmperatures up to 80C

405

Nanometers

13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials

1

Revolution per Minute

A rotating turntable provides uniform exposure during post-curing

 

Designed to Maximize Material Properties

For Standard Resins, simply use Form Cure’s default time and temperature.
For all other materials, use unique recommended settings for optimum performance.

Form Cure’s turntable rotates to provide uniform exposure.

The heating system preheats the chamber to get parts ready for optimum post-curing.

Once the chamber is heated, 13 LEDs trigger the post-curing reaction, bringing parts to their maximum mechanical properties.

Reliable, Professional Post-Curing

Once time is up, parts are fully cured and ready for peak performance.

Form Cure

 

Complete Your 3D Printing Experience

Add Form Wash and Form Cure to your SLA engine.

 

A Streamlined Solution For High-Volume Production

Wash and cure large parts and bigger batches of parts with Form Wash L and Form Cure L, our large-format automated post-processing solution for high-volume 3D printing.

Explore Form Wash L and Form Cure L
Form 3L

Form Wash + Form Cure

Stronger Parts, Less Effort

The Form 3 workflow in five minutes

The Form 3+ Workflow in Five Minutes

The Form 3+ is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use the Form 3+, from the software and materials to printing and post-processing.

 

 

 

Automate Cleaning with Form Wash

Parts travel straight from the Form 3+ to Form Wash. Opt to go glove-free and keep parts directly on the build platform.

 

 

Set it and Forget it

Simply set the appropriate time and let Form Wash get to work.

15

Minutes

Approximate wash time when using fresh isopropyl alcohol (IPA)

8.6

Liters

IPA volume for removeable wash bucket

70

Prints

Amount of prints per IPA refill in regular use

 

While you’re away, parts are precisely agitated in IPA, getting every nook and cranny perfectly clean.

 

A Consistent, Automated Workflow

Once washing completes, Form Wash
automatically lifts parts out of the IPA,
avoiding over-soaked, warped prints. Parts
air dry and are ready when you are.
 

Form Wash

 

 

Included with Form Wash

Form Cure hydrometer

HYDROMETER

A custom hydrometer tool to
check IPA saturation.

Form cure storage

STORAGE

Behind the wash bucket to
keep finishing tools tidy.

Form cure siphon pump

SIPHON PUMP

Easy IPA transfer into and
out of the wash bucket.

 

 

Unlock Peak Performance

Form Cure is finely tuned to bring parts to their maximum mechanical properties.

80

Degrees Celcius

An advanced heating system precisely controls curing tmperatures up to 80C

405

Nanometers

13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials

1

Revolution per Minute

A rotating turntable provides uniform exposure during post-curing

 

Designed to Maximize Material Properties

For Standard Resins, simply use Form Cure’s default time and temperature.
For all other materials, use unique recommended settings for optimum performance.

Form Cure’s turntable rotates to provide uniform exposure.

The heating system preheats the chamber to get parts ready for optimum post-curing.

Once the chamber is heated, 13 LEDs trigger the post-curing reaction, bringing parts to their maximum mechanical properties.

Reliable, Professional Post-Curing

Once time is up, parts are fully cured and ready for peak performance.

Form Cure

 

Complete Your 3D Printing Experience

Add Form Wash and Form Cure to your SLA engine.

 

A Streamlined Solution For High-Volume Production

Wash and cure large parts and bigger batches of parts with Form Wash L and Form Cure L, our large-format automated post-processing solution for high-volume 3D printing.

Explore Form Wash L and Form Cure L
Form 3L