Fuse Sift

PKG-FS1-SIFT-230V

7699
excluding VAT

Accessories

Add a Service Plan

The Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 3D printer. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.

  • Compact, enclosed system: A negative air pressure system keeps powder inside while enabling open access and easy cleanup.
  • Low waste: A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints.
  • Automatic powder mixing: Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.
  • Nonstop printing: Reduce downtime by transferring modular build chambers and powder cartridges between the Fuse 1 and Fuse Sift for a nonstop, cyclical workflow.
  • A complete toolkit: The Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.
  • Fuse Sift
Fuse Series Ecosystem

Fuse Series Ecosystem

Why Choose Fuse Sift

Fuse Sift streamlines your workflow with Fuse Series 3D printers by creating a seamless, contained environment for SLS production.


Mess-Free Post-Processing
Keep your workspace clean thanks to the negative air pressure system that keeps powder inside while enabling open access and easy cleanup.


Automated Powder Mixing
Fuse Sift filters used powder and dispenses and mixes new powder automatically in a seamless workflow that lets you control your supply and reduce waste.


Nonstop Printing
Reduce downtime by transferring modular build chambers and powder cartridges between the Formlabs SLS 3D printer and Fuse Sift for an uninterrupted, cyclical workflow.


A Complete Toolkit
Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.

Fuse Sift Tech Specs

Fuse Sift
Printer CompatibilityFuse Series SLS 3D printers
Dimensions (W x D x H)101.5 × 61.0 × 154.5 cm 39.9 × 24.0 × 60.8 in
Height When Open 190 cm (75 in)
Fuse Sift Weight93 kg (without build chamber or powder) 205 lb (without build chamber or powder)
Build Chamber Dimensions (W × D × H)27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in
Minimum Access Dimensions (W × D × H)221.1 × 122.0 × 218.0 cm 87.1 × 48.0 × 85.8 in
Build Chamber Weight11 kg (17.6 kg, full with 20% packed powder) 24.3 lb (38.8 lb, full with 20% packed powder)
Build Chamber Dimensions (W × D × H)27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in
Build Volume16.5 x 16.5 x 30.0 cm (with radiused corners) 6.5 × 6.5 × 11.8 in (with radiused corners)
Fresh Powder Hopper Capacity17 liters
Used Powder Hopper Capacity18 liters
Operating Environment18 – 26 ºC 68 – 80 ºF ≤ 30% ambient humidity
Air HandlingNegatively pressurized hood with replaceable HEPA filter Independent venting system
Air FiltrationReplaceable HEPA medium
Power Requirements (with a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC))EU: 230 VAC, 7.5 A (dedicated circuit) US: 120 VAC, 15 A (dedicated circuit)
Power Requirements (with a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC))EU: 230 VAC, 10 A (dedicated circuit) US: 120 VAC, 20 A (dedicated circuit)
Vacuum RequirementsAuxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)
ConnectivityWi-Fi (2.4 GHz) Ethernet (1000 Mbit) USB 2.0
Ethernet ConnectivityRJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
Wi-Fi ConnectivityProtocol: IEEE 802.11 b/g/n Frequency: 2.4 GHz Supported security: WPA/WPA2
USB ConnectivityUSB (rev 2.0) B port with a USB A-B cable
Sound EmissionDoes not exceed 76.5 dB(A)
Fuse Sift ControlInteractive touchscreen, physical buttons
Included AccessoriesLarge Brush, Small Brush x 2, Pipe Cleaners, Dental Picks, Gloves, Dust Mask, Safety Glasses, Vacuum Brush Tool, Vacuum Crevice Tool, Lifting Straps