Fuse Sift Technical Specifications

Selective Laser Sintering Powder Recovery Station

Printer Compatibility
Fuse Series SLS 3D printers
Fuse Sift Dimensions (W × D × H)
101.5 × 61.0 × 154.5 cm
39.9 × 24.0 × 60.8 in
Height when open: 190 cm (75 in)
Build Chamber Dimensions (W × D × H)
27.9 × 34.2 × 48.9 cm
11.0 × 13.5 × 19.3 in
Minimum Access Dimensions (W × D × H)
221.1 × 122.0 × 218.0 cm
87.1 × 48.0 × 85.8 in
Fuse Sift Weight
93 kg (without build chamber or powder)
205 lb (without build chamber or powder)
Build Chamber Weight
11 kg (17.6 kg, full with 20% packed powder)
24.3 lb (38.8 lb, full with 20% packed powder)
Build Volume (W × D × H)
16.5 x 16.5 x 30.0 cm (with radiused corners)
6.5 × 6.5 × 11.8 in (with radiused corners)
Fresh Powder Hopper Capacity
17 liters
Used Powder Hopper Capacity
18 liters
Operating Environment
18 – 26 ºC
68 – 80 ºF
≤ 30% ambient humidity
Air Handling
Negatively pressurized hood with replaceable HEPA filter
Independent venting system
Air Filtration
Replaceable HEPA medium
Power Requirements (with a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC))
EU: 230 VAC, 7.5 A (dedicated circuit)
US: 120 VAC, 15 A (dedicated circuit)
Power Requirements (with a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC))
EU: 230 VAC, 10 A (dedicated circuit)
US: 120 VAC, 20 A (dedicated circuit)
Vacuum Requirements
Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)
Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0
Ethernet Connectivity
RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port
Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
Wi-Fi Connectivity
Protocol: IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security: WPA/WPA2
USB Connectivity
USB (rev 2.0) B port with a USB A-B cable
Sound Emission
Does not exceed 76.5 dB(A)
Fuse Sift Control
Interactive touchscreen, physical buttons
Included Accessories
Large Brush
Small Brush x 2
Pipe Cleaners
Dental Picks
Dust Mask
Safety Glasses
Vacuum Brush Tool
Vacuum Crevice Tool
Lifting Straps

Data Sheets

Download safety and technical data sheets for all Formlabs materials.

Handling & Safety

Handling & Safety

Resin should be handled with care. Proper handling will ensure safe printing and efficient use. Our resins have been designed to be similar or safer to handle as other household chemicals or adhesives. Formlabs materials do not contain volatile solvents so special ventilation is not required. Skin contact should be avoided.

The Safety Data Sheets (SDS) are up to date for every resin product and follow the latest government guidelines. Always consult the SDS as the primary source of information to understand safety and handling of Formlabs materials. For more information about handling resin, learn more tips for resin maintenance in our Help Center.

Technical Data

Technical Data

Plastics are complex materials, and finding the right one for your specific application requires balancing multiple attributes. Our library of resins is ideal for product development, rapid prototyping, and a variety of specialized applications. Download our Technical Data Sheets to explore the mechanical properties of each material.

  • Material

  • Language

Technical Data Sheets

There is no technical data sheet available for the chosen material.

    Safety Data Sheets

    There is no safety data sheet available for the chosen material.

      Explore the Fuse Sift

      Launch the Interactive Tour
      Explore Sift
      Nylon 11 Sample Part

      Request a Free Sample 3D Print

      See and feel Formlabs quality firsthand. We’ll ship a free sample part to your office.