BioMed Clear Resin 1 L



Formlabs is committed to ensuring every medical facility has access to the latest tools to improve care and provide the best patient experience.

BioMed Clear Resin is a hard, strong material for biocompatible applications requiring long-term skin or mucosal membrane contact. This USP Class VI certified material is suitable for applications that require wear resistance and low water absorption over time.

Parts printed with BioMed Clear Resin are compatible with common sterilization methods. BioMed Clear Resin is manufactured in our ISO 13485 facility and is supported with an FDA Device Master File.

Supports print resolutions: 100 µm and 50µm
Post-curing is required.

  • BioMed Clear Resin 1 L
BioMed Clear Resin

Why Choose BioMed Clear Resin?

Fuel medical innovation using 3D printing and BioMed Clear Resin for producing end-use devices where performance and biocompatibility are critical.

Medical-Grade Material

Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.

Biocompatible and Sterilizable Parts

Testing conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.


Visibility through parts allows light to pass through.

Excellent Definition

Produce parts and assemblies with complex designs and geometries.


Use BioMed Clear Resin for producing rigid, transparent parts for point-of-care and medical manufacturing applications requiring biocompatibility.

Consider BioMed Clear Resin for:

End-use devices
Biocompatible prototypes, molds, jigs + fixtures
Models for visualization and implant sizing
Gas pathway connectors, adapters + devices

*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available.

Material Properties

Post-cured at 60ºC for 60 min

BioMed Clear Resin

Ultimate Tensile Strength

52 MPa

Young’s Modulus

2080 MPa



Flexural Strength

84 MPa

Flexural Modulus

2300 MPa

Hardness Shore D

78 D

Notched Izod

35 J/m

Heat Deflection Temp @ 0.45 MPa

67 ºC

1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used.

2 Data were measured on post-cured samples printed on a Form 3B printer with 100 µm BioMed Clear Resin settings, washed in a Form Wash for 20 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C for 60 minutes in a Form Cure.

3 BioMed Clear Resin was tested at NAMSA World Headquarters, OH, USA.


Form Wash Settings


15 min + 5 min or until clean


Wash until clean in ≥ 99% IPA. Biocompatible resins must be washed in a dedicated biocompatible IPA bath. They cannot be washed in IPA that is cross-contaminated with other resins.

Form Cure Settings


60 min



60 °C


Follow the post-curing indications to achieve maximum material properties.