Durable Resin
Engineering
Application
SLA
Pliable
28 MPa
Ultimate Tensile Strength
1 GPa
Tensile Modulus
24 MPa
Flexural Strength
Printer
Form 2, Form 3, Form 3+, Form 3B, Form 3B+, Form 3L, Form 3BL, Form 4, Form 4B, Form 4L, Form 4BL
Resin Tank
Form 2 Resin Tank (PDMS), Form 2 LT Tank, Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 4 Resin Tank, Form 4L Resin Tank
Build Platform
Form 4 Build Platform, Form 4 Flex Build Platform, Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 4L Build Platform, Form 4L Flex Build Platform
Select Printer Series and Resin Volume
| Bulk order quantity (L) | Discount % |
|---|---|
| 1 | 0% |
| 30 | 15% |
| 60 | 20% |
| 120 | 25% |
| 240 | 30% |
| 1,000 | 35% |
| 2,000 | 40% |
| 3,000 | 45% |
Choose Durable Resin for squeezable prototypes, low-friction assemblies, and jigs and fixtures undergoing significant impacts.
Printer compatibility: Form 2, Form 3, Form 3+, Form 3B, Form 3B+, Form 3L, Form 3BL, Form 4, Form 4B, Form 4L, Form 4BL
Compatible with these resin tanks: Form 2 Resin Tank (PDMS), Form 2 LT Tank, Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 4 Resin Tank, Form 4L Resin Tank
Compatible with these build platforms: Form 4 Build Platform, Form 4 Flex Build Platform, Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 4L Build Platform, Form 4L Flex Build Platform
Durable Resin has been added to your cart.
Why Choose Durable Resin?
Durable Resin is a soft and pliable material that bends without breaking while maintaining good rigidity.
Pliable
Produce parts that are highly resistant to deformation before breaking.
Impact-Resistant
Leverage high-impact strength for rugged prototyping.
Lubricious
Create parts that are smooth and glossy like an everyday plastic.
Strong and stiff
Simulate the strength and stiffness of polyethylene (PE).
Applications
Durable Resin is ideal for prototyping consumer products, packaging, and low-friction and low-wear moving parts.
Consider Durable Resin for:
Material Properties*
Durable Resin
Ultimate Tensile Strength
Tensile Modulus
Elongation
Flexural Modulus
Notched Izod
Heat Deflection Temp @ 0.45 MPa
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 2, 100 μm, Durable settings and post-cured with a Form Cure for 120 minutes at 60 °C.
Post-Processing
Form Wash Settings
20 min in IPA
Tackiness has been observed on part surfaces when washed in IPA with more than 10% resin concentration. Use fresh solvent if your parts remain tacky after washing. Do not leave Durable Resin in solvent for longer than 20 minutes total, as excessive solvent exposure affects the quality of the final part.
Form Cure Settings
60 min
60 °C
For parts printed in an engineering-focused resin (such as those in the Rigid, Tough & Durable, and Flexible & Elastic families), post-curing ensures that the parts reach their optimal mechanical properties and can function as designed. There is only one recommended post-curing time for Durable Resin.
Related Items
