Elastic 50A Resin V2
Engineering
Application
SLA
Translucent
3.4 MPa
Ultimate Tensile Strength
160 %
Elongation at Break
55 A
Shore Hardness
Printer
Form 3, Form 3+, Form 3B, Form 3B+, Form 3L, Form 3BL, Form 4, Form 4B, Form 4L, Form 4BL
Resin Tank
Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 4 Resin Tank, Form 4L Resin Tank
Build Platform
Form 4 Build Platform, Form 4 Flex Build Platform, Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 4L Build Platform, Form 4L Flex Build Platform
Select Printer Series and Resin Volume
| Bulk order quantity (L) | Discount % |
|---|---|
| 1 | 0% |
| 30 | 15% |
| 60 | 20% |
| 120 | 25% |
| 240 | 30% |
| 1,000 | 35% |
| 2,000 | 40% |
| 3,000 | 45% |
Parts printed in Elastic 50A Resin will bend, stretch, compress, and hold up to repeated cycles without tearing, and spring back quickly to their original shape.
Printer compatibility: Form 3, Form 3+, Form 3B, Form 3B+, Form 3L, Form 3BL, Form 4, Form 4B, Form 4L, Form 4BL
Compatible with these resin tanks: Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 4 Resin Tank, Form 4L Resin Tank
Compatible with these build platforms: Form 4 Build Platform, Form 4 Flex Build Platform, Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 4L Build Platform, Form 4L Flex Build Platform
Elastic 50A Resin V2 has been added to your cart.
Why Choose Elastic 50A Resin V2?
Elastic 50A Resin V2 is an elastomeric material with high elongation and high energy return. Parts are highly elastic, yet strong enough not to tear during printing.
Fast Springback
Bend, stretch, and compress parts that resume their normal shape afterwards.
Transparent
Create objects that are clear, providing visibility into the model.
Durable
Able to withstand rugged use for multiple cycles.
Pliable
Produce parts that look and feel like a molded silicone part.
Applications
Elastic 50A Resin V2 is ideal for developing soft, flexible prototypes normally produced with silicone.
Consider Elastic 50A Resin V2 for:
Material Properties*
Elastic 50A Resin V2
Ultimate Tensile Strength
Stress at 50% Elongation
Stress at 100% Elongation
Elongation
Tear Strength
Hardness Shore A
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 3, 100 μm, Elastic 50A Resin V2 settings, Elastic 50A Resin V2 post-processing steps.
Post-Processing
Form Wash Settings
20 minutes or until clean
Wash Elastic 50A Resin V2 for 20 minutes on the build platform. Remove parts from the build platform, then wash for 10 more minutes using fresh solvent. Avoid washing Elastic 50A Resin V2 for longer than 20 minutes, as this may degrade parts.
Form Cure Settings
7 minutes in water (room temperature)
70 °C
There is only one recommended post-curing time for Elastic 50A Resin V2. Fully submerge the dry parts in water in a glass beaker placed inside Form Cure.
