White Resin 1 L
3D print strong, precise concept models and prototypes that bring your ideas to life with Formlabs’ library of Standard Resins. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Their neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.
White Resin captures smooth surfaces and details, making it great for presentation-ready pieces or as a base for painted prints.
Supports print resolutions: 100 and 50 microns.
- White Resin 1 L
Why Choose White Resin?
Leverage White Resin to iterate on high-resolution prototypes and models that capture astonishing detail without sacrificing strength.
Opaque and Matte
Produce prints with smooth, opaque surfaces ideal for model making, painting, and looks-like prototyping.
High Part Quality
Show off fine details and iterate on designs when you want to focus on form alone.
Ease of Use
Start using your parts quickly, as Formlabs’ Standard Resins only need minimal post-processing.
Paint or use other finishing processes to elevate your model or prototype.
White Resin supports high detail with a smooth, matte surface finish with great mechanical properties.
Consider White Resin for:
Ultimate Tensile Strength
Heat Deflection Temp @ 0.45 MPa
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 2, 100 μm, Clear settings and post-cured with 1.25 mW/cm³ of 405 nm LED light for 60 minutes at 60°C.
Form Wash Settings
10 min in IPA
When using a single wash bucket, residue from previously washed parts deposits on part surfaces. If washing darker-colored materials like Black Resin in the same wash bucket as lighter-colored materials like White Resin or Clear Resin, some color transfer may occur.
Form Cure Settings
All standard opaque Formlabs resins (including Grey, Black, White, Color, and Model Resin) have equivalent mechanical properties. While the recommended post-cure time is 30 minutes, post-curing for 60 minutes will result in a small additional gain in tensile modulus. This post-cure setting can be used with any of these resins.