BioMed White Resin 1 L

RS-F2-BMWH-01

300
excluding VAT

Formlabs is committed to ensuring every medical facility has access to the latest tools to improve care and provide the best patient experience.

BioMed White Resin is a rigid material for biocompatible applications requiring long-term skin contact or short-term mucosal membrane contact. Unique in our portfolio, this medical-grade material is also USP <151> Pyrogen and Acute Systemic toxicity tested and can be used in applications with short-term tissue, bone, and dentin contact.

Parts printed with BioMed White Resin are compatible with common solvent disinfection and sterilization methods. BioMed White Resin is manufactured in our ISO 13485 facility and is also USP Class VI certified which makes it suitable for pharmaceutical and drug delivery applications.

Supports print resolutions: 100 µm and 50µm
Post-curing is required.

  • BioMed White Resin 1 L
BioMed White Resin

Why Choose BioMed White Resin?

Fuel medical innovation using 3D printing and BioMed White Resin for producing end-use devices where performance and biocompatibility are critical.


Medical-Grade Material
Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.


Good Definition
Produce parts and assemblies with complex designs and geometries.


High Contrast
Create contrast between substances or surfaces to aid in visualization with a white, opaque material.


Biocompatible and Sterilizable Parts
Testing conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.

Applications

Use BioMed White Resin for producing rigid, opaque parts for point-of-care and medical manufacturing applications requiring biocompatibility.

Consider BioMed White Resin for:

End-use medical devices and device components
Cutting and drilling guides
Anatomical models
Patient-specific implant sizing models and molds
Biocompatible Molds, Jigs + Fixtures
Surgical tools and templates

*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available. 

Material Properties

Post-cured at 60ºC for 60 min

BioMed White Resin

Ultimate Tensile Strength

45.78 MPa

Tensile Modulus

2020.16 MPa

Elongation

10%

Flexural Strength

74.46 MPa

Flexural Modulus

2020.16 MPa

Hardness Shore D

80 D

Notched Izod

15.11 J/m

Heat Deflection Temp @ 0.45 MPa

67 ºC

1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used.

2 Data were measured on post-cured samples printed on a Form3B with 100um BioMed White Resin settings, washed in a Form Wash for 5 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C, 60 minutes in a Form Cure.

3 BioMed White Resin was tested at NAMSA World Headquarters, OH, USA.

Post-Processing

Form Wash Settings

Duration

5 min in IPA or until clean

Notes

Wash until clean. Biocompatible resins must be washed in a dedicated biocompatible IPA bath. They cannot be washed in IPA that is cross-contaminated with other resins.

Form Cure Settings

Duration

60 min

 

Temperature

60 °C

Notes

Follow the post-curing indications to achieve maximum material properties.