Fast Cure
FH-FCU-01
Post curing maximizes material properties for stereolithography prints, improving parts’ performance and achieving biocompatibility.
Fast Cure is our powerful and high-performance curing unit designed to cure dental parts in one to six minutes. Formlabs Dental resins have been rigorously validated and fine-tuned with Fast Cure to work safely and seamlessly in an end-to-end workflow. The touch screen makes it easy to start a cure cycle with preloaded validated settings for each Formlabs Dental resin.
- Fast Cure
Features
Powerful and fast curing solution for dental 3D printing, validated in an end-to-end workflow to allow safe and efficient patient treatments.
Speed
Cure any dental 3D printed part in one to six minutes with Fast Cure, our high-performance curing unit. Cure dental models in one minute, crown and bridges in five minutes, occlusal guards in six minutes.
Instant Heating
No preheating required thanks to 200 W powerful 405 nm LED lights.
Validated End to End Workflow
Leverage Fast Cure’s preset and tuned settings for Formlabs’ Dental Resins which have been rigorously validated and fine-tuned to work safely and seamlessly in an end-to-end workflow.
Future Proof
Create and save custom settings for resins of your choice on the 7.9” touch UI. Connect a nitrogen tank when desired through the unit inlet*. *Curing of Formlabs resins do not require nitrogen
Tech Specs
Fast Cure | Form Cure | Form Cure L | |
---|---|---|---|
Printer Compatibility | Form 2, Form 3B/+, Form 3/+, Form 3L/BL (limited height to 6.5cm) | Form 3+, Form 3B+, Form 3, Form 3B, Form 2 | Form 3L, Form 3BL, Form 3+, Form 3B+, Form 3, Form 3B, Form 2 |
Dimensions | 27.5 x 31.0 x 31.0 cm 10.8 x 11.8 x 11.8 inch | 26.2 x 26.2 x 34.0 cm 10.3 x 10.3 x 13.4 in Height when open: 64 cm (25.2 in) | 69.0 x 54.0 x 44.5 cm 27.2 x 21.3 x 17.5 in |
Weight | 8.2 kg 18 lbs | 5.6 kg 12.4 lbs | 24kg 53 lb |
Turntable Diameter | 18 cm (fits up to 8 horizontal dental arches) 7.1 inch" | 19.3 cm 7.6 in | 39.5 cm 15.6 in |
Maximum Part Height | 6.5 cm (~vertical dental arch) 2.56 inch | 18.5 cm 7.28 in | 32 cm 12.6 in |
Operating Temperature | 5 - 35 °C | Suggested 18—28 °C Suggested 64—82 °F | Suggested 18—28 °C Suggested 64—82 °F |
Maximum Cure Chamber | N/A | 80 °C 176 °F | 80 °C 176 °F |
Light Source | 56 multi-directional LEDs | 13 multi-directional LEDs | 45 multi-directional LEDs |
LED Power | 200 W | 39 W | 70W |
LED Wavelength | 405 nm | 405 nm | 375 nm, 405nm |
Power Requirements | 100 - 200 V 5.4 A, 50/60HZ | 90–240 V 6.0 A 50/60 Hz 144 W | 100–120 V (NA), 220–240 V (EU) 15.0 A 50/60Hz (NA), 8.0 A 50/60Hz (EU) |