Why Choose Draft Resin

Bring products to market faster by leveraging Draft Resin early in the design process. Whether you are printing large parts or batches of smaller parts, Draft Resin ensures maximum print speed without compromising part quality.


Print Speed

Print up to 4x faster than standard resins


Part Quality

This reformulation reduced layer thickness by 33%, improving surface finish & accuracy


Professional Appearance

A new grey finish offers professional looking models


Ease of Use

This reformulation reduced support touchpoints and Form Wash and Form Cure times

Applications

Draft Resin prints up to 4 times faster than Formlabs Standard Resins, allowing you to iterate quickly and test multiple designs in a day.

Initial Prototypes
High Throughput Parts
Rapid Design Iterations
Live 3D Printing Demos

Material Properties

Green
Post-Cured at Room Temperature
Post-Cured at 60°C
Ultimate Tensile Strength
24 MPa
36 MPa
52 MPa
Tensile Modulus
0.8 GPa
1.7 GPa
2.3 GPa
Elongation at Break
14%
5%
4%
Flexural Modulus
0.6 GPa
1.8 GPa
2.3 GPa
Notched Izod
26 J/m
29 J/m
26 J/m

Post-Processing

Form Wash Settings

Duration

10 min

 

Notes

Wash Draft Resin parts in isopropyl alcohol (IPA). Avoid washing for longer than the recommended time.
When washed in IPA with a resin concentration of more than 5%, tackiness has been observed on part surfaces.

Form Cure Settings

Duration

5 min

 

Temperature

No heat or 60 °C

Notes

Draft Resin has two post-cure settings. To simply remove tackiness, post-cure with no heat for 5 minutes. For better tensile strength, post-cure at 60 °C for five minutes.