Using PreForm with the Form 1+

Download link: Using PreForm 2.20 with Form 1+

The Form 1+ is compatible with Firmware 1.4 and PreForm 2.20. Later versions of Firmware or PreForm are not compatible with the Form 1+. If you are unable to download compatible versions of Firmware or PreForm, please contact Formlabs Support or your authorized reseller for additional assistance.

Follow this guide to start printing with PreForm. More than just a walkthrough of how to send a digital model from your computer to the printer, this guide outlines all the aspects that go into a successful print. Learn how to import a file, support a model, orient a model, detect weak spots, adjust different layer thicknesses, and change advanced support settings. Using a variety of screenshots and examples to highlight dos and don’ts in 3D printing, you’ll pick up best practices to apply in future projects.

Further information on the Form 1+ can be found on the Form 1+ topic page. Troubleshooting information can be found on the FAQ topic page.