has been added to your cart.
Why Choose Elastic 50A Resin V2?
Elastic 50A Resin V2 is an elastomeric material with high elongation and high energy return. Parts are highly elastic, yet strong enough not to tear during printing.
Fast Springback
Bend, stretch, and compress parts that resume their normal shape afterwards.
Transparent
Create objects that are clear, providing visibility into the model.
Durable
Able to withstand rugged use for multiple cycles.
Pliable
Produce parts that look and feel like a molded silicone part.
Applications
Elastic 50A Resin V2 is ideal for developing soft, flexible prototypes normally produced with silicone.
Consider Elastic 50A Resin V2 for:
Material Properties*
Elastic 50A Resin V2
Ultimate Tensile Strength
Stress at 50% Elongation
Stress at 100% Elongation
Elongation
Tear Strength
Hardness Shore A
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 3, 100 μm, Elastic 50A Resin V2 settings, Elastic 50A Resin V2 post-processing steps.
Post-Processing
Form Wash Settings
20 minutes or until clean
Form Cure Settings
7 minutes in water (room temperature)
70 °C
There is only one recommended post-curing time for Elastic 50A Resin V2. Fully submerge the dry parts in water in a glass beaker placed inside Form Cure.
