Accessories

Scale your post-processing throughput with the Fuse Blast High Capacity Kit, a drop-in upgrade for Fuse Blast that processes over 50% more parts per cycle than the standard basket. It's the recommended configuration for Fuse X1 users and multi-Fuse 1 Series fleets running large, frequent batches.

A wider 400 mm opening makes loading and unloading easier and more ergonomic, while the added volume prevents the overcrowding that can damage parts mid-cycle. Swap it into your existing Fuse Blast in minutes, with no tools or machine modifications required.

Fuse Blast High Capacity Kit pairs the Large Tumbler Basket with an extra Fuse Blast Large Tumbler Basket Liner Kit, so high-volume users can replace the liner without any downtime waiting on a separate order.

The Resin Tank blocks light and is made from shatter-resistant polycarbonate. It comes with a reusable lid and wiper, making it easy to stack tanks and store resin outside of the Form 2.

The standard Resin Tank is not compatible with Elastic Resin, Grey Pro Resin, or Rigid Resin. These materials require Form 2 Resin Tank LT.

This tank was designed for printing in a high volume production environment and offers a longer tank lifetime for some Formlabs resins. 

Resin Tank LT is compatible with the following materials: 

• Required: Tough 2000, Tough 1500, Grey Pro, Rigid, Elastic 50A. New tank recommended for every 1-2 L of resin. 
• Recommended: Castable Wax, Denture Base, Denture Teeth. Compatible: Standard Resins, Dental Resins, Durable, Tough, High Temp, Flexible, Castable. Offers at least two times longer lifetime than the standard resin tank when printing with these resins.

Spare Build Platforms can speed up your workflow and allow for nonstop printing, whether you're changing resins or starting a new print while you remove your part.

Choose Build Platform 2 to quickly and easily remove parts from the print surface without tools in seconds.

Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the LFS process, the strong dual-layer film at the bottom of the Form 3 Resin Tank, allows for a dynamic and precise print process.

Notice: Form 3 Resin Tank V2.1 is compatible with all Formlabs resins, but is required for use with some specific materials. There are two previous versions of the Form 3 Resin Tank, Tank V1 and Tank V2, each with their own compatibility requirements. Read more about all tank versions, compatibility, lifetime, and maintenance in our support article.

Spare Build Platforms speed up your workflow and allow for nonstop printing, for example, starting a new print while post-processing your previous part. The Form 3L build platform holds full-size prints and has two side handles to easily transport your printed part.

Choose Form 3L Build Platform 2L to quickly and easily remove parts from the print surface without tools in seconds.

Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the LFS process, the strong dual-layer film at the bottom of the Form 3L Resin Tank allows for a dynamic and precise print process, scaled up for large format printing.

Form 3L Resin Tank V3 offers an improved print success rate in some cases compared to the previous version of the Form 3L Resin Tank V2.

Form 4 Flex Build Platform with Quick Release Technology allows you to quickly and easily remove parts from the print surface without tools in seconds. Recommended for almost all prints, Flex Build Platform eliminates the risk of damaging your part and streamlines your workflow.

Form 4 Build Platform has a durable aluminum surface. A spare Build Platform can speed up your workflow and allow for nonstop printing, whether you’re changing resins or starting a new print while you remove your part.

Choose Form 4 Flex Build Platform to quickly and easily remove parts from the print surface without tools in seconds.

The Form 4 Resin Mixer improves material performance by keeping resin homogenous in the tank during the printing process. A Resin Mixer is required anytime you are printing. Resin Mixers typically last for the lifetime of your Resin Tank or more.

For convenience, we recommend having one Resin Mixer for each Form 4 Resin Tank.

Form 4L Build Platform has a durable aluminum surface. A spare Build Platform can speed up your workflow and allow for nonstop printing, whether you’re changing resins or starting a new print while you remove your part.

Choose Form 4L Flex Build Platform to quickly and easily remove parts from the print surface without tools in seconds

Form 4L Flex Build Platform with Quick Release Technology allows you to quickly and easily remove parts from the print surface without tools in seconds. Recommended for almost all prints, Flex Build Platform eliminates the risk of damaging your part and streamlines your workflow.

Produce high-quality and affordable parts more efficiently and effortlessly than ever with Form Auto, an automated hardware extension for Form 3/3+ and Form 3B/3B+ that enables 24/7 3D printing with no printer downtime.

Form Auto automatically removes finished parts from Build Platform 2 and starts the next print without the need for operator interaction.

Form Auto is simple to set up with existing and new printers. Use Form Auto for low-mid volume production, and shared printer installations.

The Form 4L Resin Mixer improves material performance by keeping resin homogenous in the tank during the printing process. A Resin Mixer is required anytime you are printing. Resin Mixers typically last for the lifetime of your Resin Tank or more.

For convenience, we recommend having one Resin Mixer for each Form 4L Resin Tank.

Low Force Display™ (LFD) 3D printing uses a flexible yet strong dual-layer film tank for consistent, high-quality prints. Every resin tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each individual resin color or type, switching materials is as easy as sliding in a new tank.

Resin Tanks are built to last and deliver consistent performance for at least 75,000 layers of printing — approximately 190 prints using average height model (39 mm tall), any resin, and 100 µm layer height.

Reduce downtime by transferring modular build chambers and powder cartridges between the Fuse 1 Series printers and Fuse Sift for a nonstop, cyclical workflow. Each Fuse 1 Series printer includes one build chamber. Keeping an extra build chamber in your toolkit allows you to run a new print as soon as a previous job is completed.

After completing a print, remove the build chamber from the SLS 3D printer and load it into the Fuse Sift for cooling, part extraction, and material reclamation.

Reduce downtime by transferring modular powder cartridges and build chambers between the Fuse 1 Series SLS printer and Fuse Sift for a nonstop, cyclical workflow.

Use the powder cartridge to load material dispensed from the Fuse Sift, our powder recovery solution, into the Fuse 1 Series printer's hopper. The powder cartridge is also used as a mixing vessel when combining fresh and used powder.

This steel stand raises the Fuse 1 Series printer to an ergonomic height, keeping the printer stable and level while enabling easy access to the print chamber and touchscreen display.

Enhance your part extraction process with the Fuse Sift Glovebox Panel, an accessory designed to enable an enclosed workspace for the Fuse Series ecosystem. It easily installs onto the Fuse Sift, creating a contained environment that eliminates dust exposure and ensures an ergonomic workflow. This innovative design protects the operator and the surrounding workspace from unwanted powder dispersion.

The Fuse Sift powder recovery station for Fuse 1 Series SLS 3D printers requires an external vacuum to help you efficiently and safely maintain a clean workspace. The integrated hose and controls allow you to easily tidy up your workspace, clean off a build chamber, or remove debris from the sifter mesh.

Due to potential hazards associated with powders, a static dissipative vacuum that is NFPA 652 compliant is required. This Class II Division 2 vacuum fulfills all safety requirements for the Fuse Sift.

The Fuse Sift powder recovery station for Fuse 1 Series SLS 3D printers requires an external vacuum to help you efficiently and safely maintain a clean workspace. The integrated hose and controls allow you to easily tidy up your workspace, clean off a build chamber, or remove debris from the sifter mesh.

Due to potential hazards associated with powders, a static dissipative vacuum that is NFPA 652 compliant is required. This Class II Division 2 vacuum fulfills all safety requirements for the Fuse Sift.

The Fuse Parts Carrier is a container designed for powder-free part collection when used with the Fuse Sift. Simply slide it into the build chamber enclosure after part extraction to seamlessly transfer parts without opening the glovebox to maintain an enclosed environment and clean workstation.

Resin Pumping System is an accessory for Form 3 Series stereolithography (SLA) 3D printers that seamlessly delivers 5 L of resin through a pumping system directly to the printer’s resin tank. Reduce waste by 86%, improve efficiency with less frequent cartridge changes, and unlock bulk pricing on Formlabs SLA resins.

Replacement tubing for Resin Pumping System. Over time, tube performance will deteriorate resulting in slower fill times. Resin Pumping System tubing must be changed out every 6 months or when changing to a different resin type.

This kit includes both the internal tubing for the Resin Pump as well the Transfer Tube to connect the Resin Pump to the 5 L Resin Container.

Read our installation guide for the step-by-step instructions.

The Resin Pumping System is an accessory for Formlabs stereolithography (SLA) 3D printers that seamlessly delivers 5 L of resin through a pumping system directly to the printer’s resin tank. Improve efficiency with less frequent cartridge changes, and unlock bulk pricing on Formlabs SLA resins.

After part extraction with Fuse Depowdering Kit, the unsintered powder is funneled into the sifter provided. This 150 µm sieve filters out chunks or debris to keep the powder clean while allowing powder flow. The reclaimed powder can then be stored in a cartridge for the next print.

This accessory is provided with Fuse Depowdering Kit and is compatible for use with all Formlabs SLS powders except Nylon 11 CF Powder, which requires Fuse Depowdering Kit Sifter 300 Sieve.

The Fuse Sift Funnel is a drop-in attachment on any Fuse Sift to maintain a clean workstation while loading fresh SLS powders with the 10kg Powder Bag packages.

After part extraction with Fuse Depowdering Kit, the unsintered powder is funneled into the sifter provided. This 300 µm sieve filters out chunks or debris to keep the powder clean, while allowing powder flow with Nylon 11 CF Powder. The reclaimed powder can then be stored in a cartridge for the next print.

This is required for use with Nylon 11 CF Powder only (other SLS powders are compatible with the 150µm sieve provided with Fuse Depowdering Kit.

The Stainless Steel Build Platform is a corrosion-resistant build platform made with surgical grade stainless steel. With a seamless look, this build platform offers a more professional design and high print reliability.

The Stainless Steel Build Platform is required for Permanent Crown and Temporary CB Resins, and compatible with all resins.

Make your SLS Workflow workspace-friendly with the Fuse Sift Glovebox Bundle, a comprehensive solution that combines the Fuse Sift Glovebox Panel and Fuse Parts Carrier to streamline your part extraction workflow and minimize powder exposure.

Low Force Display™ (LFD) 3D printing uses a flexible yet strong dual-layer film tank for consistent, high-quality prints. Every resin tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each individual resin color or type, switching materials is as easy as sliding in a new tank.

Resin Tanks are built to last and deliver consistent performance for at least 75,000 layers of printing — approximately 190 prints using average height model (39 mm tall), any resin, and 100 µm layer height.

Form Studio Wash+Cure Rinse Bucket enables a dedicated two-stage washing process for your printed parts. Use it for a secondary rinse after the primary wash to prevent solvent saturation and remove lingering resin residue for a cleaner final part. Includes a wash bucket with lid, internal basket, and solvent squeeze bottle.

Form Studio 1 Resin Tank is a strong, flexible tank built for fast print speeds and fine feature resolution. Every tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each resin color or type, switching materials is as easy as sliding in a new tank.

This tank is optimized for chemical compatibility with Alpha Resins, Flexible 80A Resin V2, and True Cast Resin. It is not compatible with Tough 1500 Resin or materials needing to utilize Open Material Mode. For those materials, use the Form Studio 1 Resin Tank Pro.

Resin Tanks are built to last and deliver consistent performance for at least 75,000 layers of printing — approximately 190 prints using average-height model (39 mm tall), any resin, and 100 µm layer height.

Form Studio 1 Resin Tank Pro is a strong, flexible tank built for broad chemical compatibility. Every tank includes a reusable lid, making it easy to stack tanks and store resin outside of the machine. With a separate tank for each resin color or type, switching materials is as easy as sliding in a new tank.

This tank is optimized to print with Tough 1500 Resin V2 and any material that requires Open Material Mode on Form Studio 1.

Resin Tanks are built to last and deliver consistent performance for at least 75,000 layers of printing — approximately 190 prints using average-height model (39 mm tall), any resin, and 100 µm layer height.

Form Studio 1 Build Platform features a durable aluminum surface. A spare Build Platform speeds up your workflow and enables nonstop printing, whether you’re changing resins or starting a new print while you remove your finished parts.

Choose Form Studio 1 Build Platform Flex to quickly and easily remove parts from the print surface without tools, in seconds.

Form Studio 1 Build Platform Flex with Quick Release Technology lets you quickly and easily remove parts from the print surface without tools, in seconds. Recommended for almost all prints, Build Platform Flex eliminates the risk of damaging your part and streamlines your workflow.

VOC Extractor is a compact add-on that reduces volatile organic compound levels while your printer runs. Air passes through two carbon filters, lasting roughly 330 hours of print time and replaceable in seconds. Three fan speeds let you match airflow to your needs. 

Compatible with Form Studio 1 and Form 4. UL GREENGUARD Gold Certification applies to Form Studio 1 used with Alpha Resins.

Form Studio 1 Build Platform Jig is a tool that holds your Form Studio 1 Build Platform or Build Platform Flex at an ergonomic angle at the edge of your workbench for easier part removal. By freeing up both hands, this productivity add-on improves safety, reduces strain, and streamlines your part removal step.