Fuse Sift and Fuse Blast Technical Specifications

Parameters

Contact Sales

Fuse Sift

Fuse Blast

Printer compatibility

Fuse Series SLS 3D Printers

Third-party powder bed fusion 3D printers

Minimum dimensions for convenient access (W × D × H)

221.1 × 122.0 × 218.0 cm
87.1 × 48.0 × 85.8 in

145 × 150 × 210 cm
57.4 × 59.6 × 82.6 in

Product dimensions (W × D × H)

101.5 × 61.0 × 154.5 cm
39.9 × 24.0 × 60.8 in
Height when open: 190 cm (75 in)

100 × 75 × 175 cm
39 × 29.6 × 68.7 in
Height when open: 195 cm (76.8 in)

Product weight

93 kg (without build chamber or powder)
205 lb (without build chamber or powder)

164 kg (without blasting media)
360 lb (without blasting media)

Hopper capacity

Fresh Powder Hopper Capacity: 17 liters
Used Powder Hopper Capacity: 18 liters

Media hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media
Waste hopper capacity 10.6 L

Operating environment

18 – 26 ºC
68 – 80 ºF
≤ 50% ambient humidity

10–36 ºC
50–96.8 ºF
Elevation up to 7500 ft / 2286 meters

Air handling

Negatively pressurized hood with replaceable HEPA filter
Independent venting system

Power requirements ¹

EU: 230 VAC, 7.5 A (dedicated circuit)
US: 120 VAC, 15 A (dedicated circuit)

EU: 230 VAC, 3 A (no dedicated circuit or vacuum required)
US: 120 VAC, 6 A (no dedicated circuit or vacuum required)

Power requirements ²

EU: 230 VAC, 10 A (dedicated circuit)
US: 120 VAC, 20 A (dedicated circuit)

N/A

Vacuum requirement

Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)

No vacuum required

Compressed air requirements

N/A

Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar.
Regulate pressure input between 90-120 PSI / 6-8 bar.
Typically achieved by a single 4 HP compressor.

Connectivity

Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0

Wi-Fi connectivity

Protocol: IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security: WPA/WPA2

Protocol: IEEE 802.11 b/g/n/ac
Frequency: 2.4 / 5.0 GHz
Supported security: WPA/WPA2

Ethernet connectivity

RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port. Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.

USB connectivity

USB (rev 2.0) B port with a USB A-B cable

USB (rev 2.0) C port with a USB A-C or C-C cable

Sound emission

Does not exceed 76.5 dB(A)

Does not exceed 75 dB(A)

Product control

Interactive touchscreen, physical buttons

Interactive touchscreen, foot pedals for manual control

Build chamber dimension

27.9 × 34.2 × 48.9 cm
11.0 × 13.5 × 19.3 in

N/A

Build chamber weight

11 kg (17.6 kg, full with 20% packed powder)
24.3 lb (38.8 lb, full with 20% packed powder)

N/A

Included accessories

Large Brush
Small Brush x 2
Pipe Cleaners
Dental Picks
Gloves
Dust Mask
Safety Glasses
Vacuum Brush Tool
Vacuum Crevice Tool
Lifting Straps

Transfer container
Control pedals
ESD wrist strap
7mm socket wrench
Blast orifice (3mm)
Blast orifice (4mm - installed)
T-20 driver
Floor mat

Tumbling basket dimensions

N/A

Internal diameter: 450 mm / 17.7”
Opening diameter: 345 mm / 13.6”
Basket depth: 250 mm / 9.8”
Basket is removable without tools.
Fits a full Fuse build volume.

Internal work area (W x D x H)

N/A

71 x 55 x 67 cm
27.9 x 21.6 x 26.3 in

Accessible work area (W x D x H)

N/A

57 x 50 x 67 cm
22.4 x 19.6 x 26.4 in
(basket removed)

¹With a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC).

²With a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC)