Form Cure V2 120V

From$999excl. sales tax

Form Cure V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Compatible Printer: Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form 2, Form Studio 1
Post-Processing: Automated
Turntable Diameter: 23.5 cm
9.25 in

Compatible Printer: Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form 2, Form Studio 1
Post-Processing: Automated
Turntable Diameter: 23.5 cm
9.25 in

Post-processing

$699Form Wash V2
Form Wash V2
All SLA 3D printed parts require washing to remove residual resin. Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents.

Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, Form Wash automatically raises parts out of the solvent so they can air dry, avoiding over-soaked, warped prints.

Form Wash is compatible with all Formlabs desktop SLA 3D printers.
Tech specs
Compatible Printer
Form 4, Form 4B, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form 2, Form Studio 1
Post-Processing
Automated
$699
$299Finishing Tools
Finishing Tools
Bring SLA parts to the next level with Formlabs Finishing Tools: a curated set of post-processing solutions for SLA 3D printing that streamlines every step in the workflow from part and support removal to sanding, buffing, and polishing.

Curated by experienced engineers and validated by customers, these 3D printing finishing tools were designed to enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.

What’s Included:

Pen Sander, Rotary tool, Bit kit, working mat, hobby knifes and other accessories

Tech specs
Compatible Printer
Form 4, Form 4B, Form 4L, Form 4BL, Form 3, Form 3L, Form 3B, Form 3BL, Form 2
Post-Processing
Manual
$299

Form Cure V2 120V$999

Ready to orderForm Cure V2 120V

$999excl. sales tax

Cure Most Parts in 60 Seconds

Rapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints.

Blazing Fast Curing

5-6x faster cure cycles and 40% quicker heat up times than the previous generation.

Near Instant Heat-Up

60 °C in 150 seconds*

80 °C in 360 seconds*

_{*(230V version)}

Speed Up Workflows for All Resins

General Purpose Resins in 60 seconds

Engineering & Biocompatible Resins in 3-15 minutes

Consistent, Validated Results

Optimized for reliable and repeatable curing performance.

Convection heating system that reaches temperatures up to 100 °C
48 multi-directional LEDs that provide a uniform irradiance of 14.5 mW/cm²

Fully Compatible With Form 4

Designed to fit an entire Form 4 build, anything from large parts to full production batches.

235 mm rotating turntable
245 mm maximum part height

Easier Than Ever

Sleek new design and a compact footprint make curing as easy as pushing a button.

45+ pre-programmed cure profiles
Easy-to-clean glass turntable
Side-hinged door to allow easy access

Form 4 Workflow in Minutes

Form Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.

Tech Specs

Parameter	Form Studio Wash+Cure	Form Cure V2	Form Cure V1	Form Cure L V2	Form Cure L V1
Printer Compatibility	Form Studio 1, Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2	Form 4, Form 4B, Form Studio 1, Form 3/+, Form 3B/+, Form 2	Form 3/+, Form 3B/+, Form 2	Form 4L, Form 4BL, Form 4, Form 4B, Form Studio 1, Form 3L, Form 3BL, Form 3/+, Form 3B/+, Form 2	Form 4L, Form 4BL, Form 4, Form 4B, Form Studio 1, Form 3L, Form 3BL, Form 3/+, Form 3B/+, Form 2
Dimensions	33 x 30 x 44 cm 13 x 11.8 17.3 in	33.7 × 40.4 × 37.2 cm 13.3 × 14.0 × 15.9 in	26.2 x 26.2 x 34.0 cm 10.3 x 10.3 x 13.4 in Height when open: 64 cm (25.2 in)	507 × 543 × 545 mm 20.0 × 21.4 × 21.5 in	69.0 x 54.0 x 44.5 cm 27.2 x 21.3 x 17.5 in
Weight	9 kg 19.8 lb	12.1 kg 26.7 lb	5.6 kg 12.4 lb	40.0 kg 88.2 lb	24 kg 53 lb
Turntable Diameter	24.0 cm 9.45 in	23.5 cm 9.25 in	19.3 cm 7.6 in	404 mm 15.9 in	39.5 cm 15.6 in
Maximum Part Height	22.5 cm 8.9 in	24.5 cm 9.64 in	18.5 cm 7.28 in	365 mm 14.4 in	32 cm 12.6 in
Maximum Cure Chamber Temperature	N/A - No Heater	100 °C 212 °F	80 °C 176 °F	100 °C 212 °F	80 °C 176 °F
Light Source	24 multi-directional LEDs	48 multi-directional LEDs	13 multi-directional LEDs	96 multi-directional LEDs	45 multi-directional LEDs
LED Power	48 W	150 W	39 W	350 W	70 W
LED Radiant	27.8 W	50 W	9.1 W	120 W	36 W
LED Wavelength	405 nm	405 nm	405 nm	405 nm	375 nm, 405 nm
Power Requirements	Input: 100–240 VAC, 50/60 Hz, maximum 7A Output: 24 VDC, 60 W	Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A	90–240 V 6.0 A 50/60 Hz 144 W	Input (NA): 100 – 125 VAC, 50–60Hz, 15 A Input (EU): 220 – 240 VAC, 50–60Hz, 8 A	Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A