Note:
Print settings may become available at any point during the month or quarter listed in the table.
Fuse X1 material availability roadmap
Fuse X1 material availability roadmap
Fuse X1 prints with Formlabs SLS powders and, through Open Material Mode, with third-party powders. Formlabs materials will become available in stages, as shown below.
This page is continuously updated with the latest information on material availability. New print settings are made available through PreForm, so download the latest version to stay up to date.
| Material | Availability |
|---|---|
| Nylon 12 Powder | Available now |
| Nylon 11 Pro Powder | Q1 2027 |
| Nylon 12 GF Powder | Q2 2027 |
| TPU 90A Powder | Q2 2027 |
| Third-party 1064 nm powders | Available now with Open Material Mode |
Open Material Mode: The Fuse X1 can print with any powder that works with a 1064 nm laser. Formlabs does not validate third-party powders, so print settings and results depend on the material you choose.
Questions: Contact Formlabs Sales for current timing and to learn more about the right powder for you.