- Print Technology
- SLS
- Build Volume (W x D x H)
165 x 165 x 300 mm
6.5 x 6.5 x 11.8 in
Designed for maximum output and minimum waste, Fuse 1+ 30W is our compact industrial SLS 3D printer. Unlock unprecedented print speeds and material enablement to deliver truly rapid production in-house. From print setup to powder recovery, our easy-to-use hardware and software are designed to maximize your efficiency at every step of the process.
- Print Technology
- SLS
- Build Volume (W x D x H)
165 x 165 x 300 mm
6.5 x 6.5 x 11.8 in
Fuse 1+
Package: Fuse 1+ 30W Complete Package 120V
Fuse 1+ 30W Printer 120V (including Build Chamber)
Fuse Series Build Chamber 120V
Fuse Series Powder Cartridge x2
Fuse Series Printer Stand
Fuse Sift 120V
Fuse Blast
Fuse Blast Polishing Agent 115 mL
Fuse Blast Polishing Media 4 L (2.5 kg) x2
Fuse Blast Polishing Mesh
Fuse Blast Polishing Module
Fuse 1 Generation Quartz Tube Heater 120V x2
Fuse 1 Generation Air Intake Filter
Fuse 1 Generation Air Exhaust Filter
Fuse 1 Generation Build Chamber External Frame Gasket
Fuse Build Chamber Inner Gasket
Fuse 1 Generation Build Chamber Lead Screw Cleaning Kit
Fuse 1 Generation Build Chamber Print Bed Assembly
Fuse 1 Generation Optical Cassette
Fuse 1 Generation IR Sensor Kit
Fuse Series Service Plan
Fuse Series Complete Service 1 Year
$4,500
Fuse Series Complete Service 3 Years
$9,000
Fuse Series Complete Service 5 Years
$13,500
Printer Accessories
Fuse Series Powder Cartridge
$149
Fuse Series Printer Stand
$299
Fuse 1+ 30W Complete Package 120VSKU : PKG-FS1-30-COMPLETE-120V
$56,902
Why Choose Fuse 1+?
INDUSTRIAL-GRADE MATERIALS
Replace and improve molded or machined plastics
LOWEST COST PER PART
Avoid costly tooling and shorten lead times
SLS MADE SIMPLE
An easy and intuitive workflow from start to finish
INDUSTRIAL POWER, IN-HOUSE
Solve problems in your office and on the factory floor
SCALABLE + AFFORDABLE
Expand as the demand grows with agile manufacturing
Fuse Series Workflow Overview
Fuse Series Training
Learn everything you need to get up and running quickly and successfully with your printer and how to incorporate 3D printing into your workflow through our training videos.
Designed for maximum output and minimum waste, Fuse 1+ 30W is our compact industrial SLS 3D printer. Unlock unprecedented print speeds and material enablement to deliver truly rapid production in-house. From print setup to powder recovery, our easy-to-use hardware and software are designed to maximize your efficiency at every step of the process.
Fuse X1 is a large-format industrial SLS 3D printer, built for engineers, manufacturers, and service bureaus looking to produce large prototypes and high-volume end-use parts with a faster turnaround. Its massive build volume and high packing density enable same-day large parts and 3x the throughput compared to competing platforms. AI-powered Print Intelligence monitors jobs from first layer to final part to reduce failures. Setup takes about an hour, print-to-print changeover takes minutes, and the same end-to-end workflow handles extraction, powder reclaiming, and finishing — moving parts from printed to polished in as little as 15 minutes.
Selective Laser Sintering
Selective Laser Sintering
110 microns
0.004 in
110 microns
0.004 in
Modular, compatible with Fuse 1 generation printers and Fuse Sift
Modular, compatible with Fuse X1 generation printer and Fuse Sift X1
64.5 × 68.5 × 107 cm (165.5 cm with stand)
25.4 × 27.0 × 42.0 in (65.0 in with stand)
157 x 83 x 193 cm
62.1 x 31.3 x 75.8 in
145.5 × 149.5 × 167.5 cm (49.4 × 59 × 66 in) to allow access to the front and sides of the printer
261 x 243 x 241 cm (102.8 x 95.8 x 95.1 in) to allow access to the front and sides of the printer
120 kg (without build chamber or powder)
265 pounds (without build chamber or powder)
570 kg (without build chamber or powder)
1256 lbs (without build chamber or powder)
Ytterbium Fiber
IEC 60825-1: 2014 certified
1070 nm wavelength
Maximum 30 Watts
3.24 mrad beam divergence (nominal, full angle)
Ytterbium Fiber
IEC 60825-1: 2014 certified
1064 nm wavelength
Maximum 120 Watts
3 mrad beam divergence (nominal, full angle)
Ytterbium Fiber 30W
Ytterbium Fiber 120W
165 x 165 x 300 mm
6.5 x 6.5 x 11.8 in
8.2L
330 x 330 x 565 mm
13.0 x 13.0 x 22.2 in
61.5L
Nylon 12, Nylon 12 Tough, Nylon 12 White, Nylon 11, Nylon 12 GF, Nylon 11 CF, and TPU 90A Powders, or any 1064 nm powder with Open Material Mode.
Nylon 12, Nylon 11*, Nylon 12 GF**, TPU 90A Powder**, or any 1064 nm powder with Open Material Mode.
*Available by the end of 2026 **Available by June of 2027
Frequently Asked Questions
The Complete Package provides an end-to-end automated SLS manufacturing ecosystem. It includes the Fuse 1+ 30W Printer, 2 Fuse Build Chambers, 2 Fuse Series Powder Cartridges, a Fuse Series Printer Stand, the Fuse Sift (automated powder recovery station), the Fuse Blast (automated cleaning station) with Polishing Module and media, and a Fuse 1+ 30W Uptime Kit.
In addition to the Complete Package, Formlabs offers the Standalone Printer and the Starter Package. While the Starter Package includes manual depowdering tools, the Complete Package adds fully automated powder management, cleaning, and surface polishing equipment for high-throughput production.
The Fuse 1+ 30W uses selective laser sintering (SLS) technology. It is designed as a compact industrial SLS 3D printer intended to deliver rapid production output in-house with maximum efficiency.
The build volume is 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in). This compact footprint is optimized for high throughput with minimal material waste.
The Complete Package includes a full automated post-processing suite featuring Fuse Sift and Fuse Blast. Fuse Sift automates part extraction, powder recovery, and fresh/used powder mixing, while Fuse Blast provides automated media-blasting and optional polishing to yield clean-to-the-touch, dye-ready parts in minutes.
Formlabs PreForm software is used to import, orient, and prepare builds. You can also monitor and manage prints remotely through Formlabs Dashboard.
The Fuse 1+ 30W supports a range of high-performance SLS materials, including nylon and TPU. You can explore the full range of compatible powders on the Formlabs materials page. The printer also supports third-party materials through Open Material Mode.
Pricing depends on your specific configuration, any accessories you add, and your region. For the most current pricing or to discuss volume and financing options, contact a Formlabs 3D printing expert.