- Print Technology
- SLS
- Build Volume (W x D x H)
165 x 165 x 300 mm
6.5 x 6.5 x 11.8 in
Designed for maximum output and minimum waste, Fuse 1+ 30W is our compact industrial SLS 3D printer. Unlock unprecedented print speeds and material enablement to deliver truly rapid production in-house. From print setup to powder recovery, our easy-to-use hardware and software are designed to maximize your efficiency at every step of the process.
- Print Technology
- SLS
- Build Volume (W x D x H)
165 x 165 x 300 mm
6.5 x 6.5 x 11.8 in
Fuse 1+
Package: Fuse 1+ 30W Starter Package 120V
Fuse 1+ 30W Printer 120V (including Build Chamber)
Fuse Series Powder Cartridge
Fuse Depowdering Kit Workspace and Tools
Fuse Depowdering Kit Sifter (120V) with 150 Sieve
Fuse Series Service Plan
Fuse Series Complete Service 1 Year
$4,500
Fuse Series Complete Service 3 Years
$9,000
Fuse Series Complete Service 5 Years
$13,500
Printer Accessories
Fuse Series Powder Cartridge
$149
Fuse Series Printer Stand
$299
Fuse 1+ 30W Starter Package 120VSKU : PKG-FS1-30-ST-120V
$24,999
Why Choose Fuse 1+?
INDUSTRIAL-GRADE MATERIALS
Replace and improve molded or machined plastics
LOWEST COST PER PART
Avoid costly tooling and shorten lead times
SLS MADE SIMPLE
An easy and intuitive workflow from start to finish
INDUSTRIAL POWER, IN-HOUSE
Solve problems in your office and on the factory floor
SCALABLE + AFFORDABLE
Expand as the demand grows with agile manufacturing
Fuse Series Workflow Overview
Fuse Series Training
Learn everything you need to get up and running quickly and successfully with your printer and how to incorporate 3D printing into your workflow through our training videos.
Designed for maximum output and minimum waste, Fuse 1+ 30W is our compact industrial SLS 3D printer. Unlock unprecedented print speeds and material enablement to deliver truly rapid production in-house. From print setup to powder recovery, our easy-to-use hardware and software are designed to maximize your efficiency at every step of the process.
Fuse X1 is a large-format industrial SLS 3D printer, built for engineers, manufacturers, and service bureaus looking to produce large prototypes and high-volume end-use parts with a faster turnaround. Its massive build volume and high packing density enable same-day large parts and 3x the throughput compared to competing platforms. AI-powered Print Intelligence monitors jobs from first layer to final part to reduce failures. Setup takes about an hour, print-to-print changeover takes minutes, and the same end-to-end workflow handles extraction, powder reclaiming, and finishing — moving parts from printed to polished in as little as 15 minutes.
Selective Laser Sintering
Selective Laser Sintering
110 microns
0.004 in
110 microns
0.004 in
Modular, compatible with Fuse 1 generation printers and Fuse Sift
Modular, compatible with Fuse X1 generation printer and Fuse Sift X1
64.5 × 68.5 × 107 cm (165.5 cm with stand)
25.4 × 27.0 × 42.0 in (65.0 in with stand)
157 x 83 x 193 cm
62.1 x 31.3 x 75.8 in
145.5 × 149.5 × 167.5 cm (49.4 × 59 × 66 in) to allow access to the front and sides of the printer
261 x 243 x 241 cm (102.8 x 95.8 x 95.1 in) to allow access to the front and sides of the printer
120 kg (without build chamber or powder)
265 pounds (without build chamber or powder)
570 kg (without build chamber or powder)
1256 lbs (without build chamber or powder)
Ytterbium Fiber
IEC 60825-1: 2014 certified
1070 nm wavelength
Maximum 30 Watts
3.24 mrad beam divergence (nominal, full angle)
Ytterbium Fiber
IEC 60825-1: 2014 certified
1064 nm wavelength
Maximum 120 Watts
3 mrad beam divergence (nominal, full angle)
Ytterbium Fiber 30W
Ytterbium Fiber 120W
165 x 165 x 300 mm
6.5 x 6.5 x 11.8 in
8.2L
330 x 330 x 565 mm
13.0 x 13.0 x 22.2 in
61.5L
Nylon 12, Nylon 12 Tough, Nylon 12 White, Nylon 11, Nylon 12 GF, Nylon 11 CF, and TPU 90A Powders, or any 1064 nm powder with Open Material Mode.
Nylon 12, Nylon 11*, Nylon 12 GF**, TPU 90A Powder**, or any 1064 nm powder with Open Material Mode.
*Available by the end of 2026 **Available by June of 2027
Frequently Asked Questions
The Starter Package includes the Fuse 1+ 30W Printer (with Build Chamber), a Fuse Series Powder Cartridge, the Fuse Depowdering Kit Workspace and Tools, and a Fuse Depowdering Kit Sifter (120V) with 150 Sieve. This gives you everything needed to begin printing and manually depowder parts from day one.
You can add several accessories at checkout, including additional Fuse Series Powder Cartridges, a Fuse Series Printer Stand, and a Fuse 1+ 30W Printer 120V Uptime Kit. These help you expand your setup and maintain consistent uptime as your workflow grows.
The Starter Package is built around the printer and essential manual depowdering tools, making it a focused entry point into SLS printing. The Fuse 1+ 30W Complete Package adds advanced post-processing equipment, such as the Fuse Sift and Fuse Blast, for a more automated, professional-grade workflow.
The Fuse 1+ 30W uses selective laser sintering (SLS) technology. It is designed as a compact industrial SLS 3D printer intended to deliver rapid production output in-house with maximum efficiency.
The build volume is 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in). This compact footprint is optimized for high throughput with minimal material waste.
The Starter Package includes the Fuse Depowdering Kit Workspace and Tools along with a Sifter, allowing you to manually remove and sift unsintered powder from your printed parts after a print is complete. This is a hands-on approach suited for lower-volume workflows or teams getting started with SLS.
Yes. If your production needs grow, you can add Fuse Sift for automated powder recovery and recycling, and Fuse Blast for automated cleaning and optional polishing, bringing your workflow to the Complete Package level.
Formlabs PreForm software is used to import, orient, and prepare builds. You can also monitor and manage prints remotely through Formlabs Dashboard.
The Fuse 1+ 30W supports a range of high-performance SLS materials, including nylon and TPU. You can explore the full range of compatible powders on the Formlabs materials page. The printer also supports third-party materials through Open Material Mode.
Pricing depends on your specific configuration, any accessories you add, and your region. For the most current pricing or to discuss volume and financing options, contact a Formlabs 3D printing expert.